Grill Assembly - Frigidaire 26" Stainless Steel Outdoor Grill Use & Care Manual

SIDE SHELF ATTACHMENT
1. Remove the side burner from the front door.
2. The screws used to attach the side shelf and side
burner are already screwed into the two side
panels. Remove the screws from the side panels.
(See Fig. 1)
3. Align with the holes in the left side shelf, and then
re-attach into the holes on the left side panel of
the grill.
4. Repeat the above steps to install the right side
burner on right side panel. Please note: for the left
side shelf, insert the top two screws from the
inside of the grill and the bottom two from the
outside. For the right side burner the four screws
are all secured from the outside.
BATTERY ASSEMBLY
1. In order to install the battery, remove the ignition
button housing. Please keep the positive pole of
the battery facing toward you. Insert the battery
into the housing. Replace the igniter button
housing after battery is installed.

Grill Assembly

11
Fig. 1
Fig. 2