Panasonic EY7440-U1 Service Manual page 6

EY7440-U1 /
Ref. No. 2D Procedure 2A → → → → 2B → → → → 2C→ → → → 2D
Ref. No. 2E Procedure 2A → → → → 2B → → → → 2C→ → → → 2D→ → → → 2E
Assembly of the Adjusting Screw and the Clutch Handle.
1. Align the mark of adjusting screw with the projection (A) of
driving block.
2. Turn the adjusting screw into the driving block about one rotation
for clockwise direction.
3. Align the mark of adjusting screw with the projection (A) of
driving block.
4. Set the clutch handle with position 1 on top.
(Aligh the position 1 of clutch handle with the projection (A) of driving
block.)
5. Insert the clutch handle with adjusting the tabs of adjusting screw
to the groove of inside clutch handle.
Fig. 8
Attachment of the H/L Change Handle.
1. Insert the both side of handle spring into the groove of Ring gear
A.
6