Table of Contents
Advertisement
Front
FRONT AV SOCKET (AV2)
The front AV socket (B2) - (B3)
has audio and video inputs. To
switch from TV to these inputs,
use the TV / AV buttons (A5) or
(B7) and select AV2.
DAILY USE
SWITCHING ON TV SET
1) If stand-by indicator (B5) is red, then
the TV set is in stand-by mode.
You can switch on using the remote
control POWER button (A1), the
NUMBER 0....9 buttons (A3), or
PROGRAM UP (A6) / DOWN (A21)
buttons. The front panel PROGRAM
UP/DOWN buttons (B9) can also be used.
Once on, the stand-by indicator turns to
green and the picture appears on the screen.
SWITCHING OFF
TV SET
Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode.
TV/AV SELECTION
Allows to switch between TV and external modes.
By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV /
AV (B7) button, the on-screen display is changed as shown :
AV1 > AV2 > SVHS > TV
OR
CAMCORDER
2) If stand-by indicator (B5) is not lit,
then the TV set is powered off.
You must press the TV set front
panel MAIN POWER button (B1).
If a picture does not appear, then
the stand-by indicator will be
lighted red. In this case, use the
remote control as indicated in 1).
1) Pressing the remote control POWER
button (A1), you can switch off to
stand-by mode (low power
consumption mode) which also allows
quick restart by remote control (see
above: SWITCHING ON TV SET).
VIDEO GAME
FRONT S-VIDEO JACK (Option for real flat TVs)
The front S-VIDEO jack (B10) has video inputs only.
It is necessary to connect the audio inputs to socket (B3)
in order to have audio and video. To switch from TV to
these inputs, use the TV / AV buttons (A5) or (B7) and
select SVHS.
3) If stand-by indicator (B5) is flashing red, and
green then the TV set is in child-lock mode.
It is necessary to use the remote control
POWER button (A1), NUMBER 0....9 buttons
(A3), or PROGRAM UP (A6) / DOWN (A21)
buttons. The front panel PROGRAM
UP/DOWN buttons (B9) will not function.
Once on, the stand-by indicator turns to green
and the picture appears on the screen.
2) Pressing the TV set front panel MAIN
POWER button (B1), you can completely
power off the TV set. In this case, you
must use the same front panel POWER
button (B1) to switch on again (see above:
SWITCHING ON TV SET).
HEADPHONE SOCKET
To hear TV sound with
headphones, insert a 3.5mm
headphone plug into the
headphone socket (B4). The
speaker's sound will be
automatically cut off.
7
Advertisement
Table of Contents
