Using The Appliance - Philips HF8400 User Manual

- The female massager only fits properly in the charging case with the
buttons facing up.
- The male massager only fits properly in the charging case with the
buttons facing down.
The massagers switch off automatically when you place them in the
charging case and close the lid.
Note: The charging case does not work when the massagers are placed
incorrectly or when the lid is open.
Note: You can also charge one massager at a time.
 Close the lid of the charging case. (Fig. )
Note: The charging case does not work if the lid is open.
The charging light on the charging case starts flashing to indicate
,
that the massagers are being charged.
Note: When you charge the massagers for the first time or after a long
period of disuse, it may take a few minutes before the charging light starts
flashing. This is normal.
Note: The massagers may produce a smell the first few times you charge
them. This is normal.
When the massagers are fully charged, the charging light goes out.
,

using the appliance

Note: The massager shown in the figures is the female massager. The male
massager has the same buttons and functionalities.
Thoroughly clean the massagers before first use, after every use and
when you use them on another body area, to reduce the risk of
infection (see chapter 'Cleaning').
1 Press any button to switch on the massager (Fig. ).
The light ring goes on.
,
The massager starts operating in the default mode (mode 1) and
,
at moderate vibration speed.
EnglisH