LG EzSign 2.0 Editor User Manual page 10

10
Using LG EzSign 2.0 Editor
Exporting to TV
Using a wireless network, you can transfer content
files saved on a PC to the TV without having to
connect a USB device. To use this function, you
must first connect a wireless dongle to the TV in
order to connect to the wireless network. 12 Page
See the network configuration.) The PC must also
be connected to a router via a wired or wireless
connection.
USB Wi-Fi Dongle
PC Editor S/W
NOTE
ꔈ If a wireless dongle is used, EzSign content files
saved on a USB device cannot be played.
ꔈ If a content file is transferred via the wireless
dongle, the file is immediately saved in the TV
memory.
ꔈ The connection may not be established
depending on wireless signal interference or
strength.
IMPORTANT
ꔈ If there is wireless signal interference, check
whether the router is operating normally. When
there is a wall or another router between the
router and the TV, it may not work properly so
remove any obstacles before installing it.
ꔈ When multiple TVs are connected to a single
router, make sure that the rounder is working
properly before setting a network.
ꔈ Wi-Fi connection is only available through an
AP.
ꔈ External Internet environment is not supported.
ꔈ A password must be set for the router to pre-
vent other devices from being connected.
ꔈ When content files in the existing playlist 1 are
played on TV, contents files in another playlist 2
can be sent to the TV. When it happens, the
files in the playlist 2 are played as scheduled by
replacing the files being played without a pop-
up window displayed.
1
Connect a wireless dongle to the TV which is to
be connected to the router. You can check the
network connection status from the TV's net-
work menu. (The network must be connected to
the minimum gateway.)
2
Connect the PC to the router via a wireless/
wired connection.
3
In EzSign 2.0 Editor, select Send To TV.
4
Select TV Auto Scan to automatically search for
the TV connected to the router. You can manu-
ally enter an IP by selecting
+ Add TV for connection.
5
Select the TV you want to connect and then
select Send to Selected TV.
6
When the transfer is complete, the transferred
content file is immediately played on TV.
IMPORTANT
ꔈ ꔈ T he TV name will first be displayed as its serial
ꔈ
number. You can change it as desired (up to 16
characters) by clicking the cell.
395FDKSJ34