Active Subwoofer; Display Window - LG AR702BR Owner's Manual

Active Subwoofer

1. LED indicator
The RED lights when active subwoofer does not
receive a input for about 10 minutes. (Standby
mode.)
The BLUE lights when active subwoofer is
receiving a input.
2. Adjusting Volume (MIN - MAX)
Turn VOLUME dial clockwise/counterclockwise to
increase or decrease the sound level.
Note
AR702NS model does not supply the active subwoofer.

Display window

2
1
SLEEP HDMI
MIC USB
7
1. SLEEP indicator
Lights up when the Sleep function has been set.
2. HDMI indicator
Lights up when the HDMI function has been set.
3. Listening mode & format indicators
These indicators show the currently selected
listening mode and the format of digital input
signals.
4. TUNED indicator
Lights up when the unit is tuned into a radio station.
5. MUTE indicator
Flashes while the unit is muted.
1
2
3. Frequency Controller (70Hz - 180Hz)
4. INPUT
5. Power Switch
6. Power Cord
3
WMA MP3 PCM Virtual FM ST.
8
6. VOLUME indicator
7. MIC indicator
8. Message area
9. Speaker indicators
3
4
5
6
Turn HIGHCUT dial clockwise/counterclockwise to
adjust the frequency.
Connect the unit's SW(PRE OUT) to INPUT of
active subwoofer.
When pressing the upper part of this switch, the
Power is ON. Pressing the lower part turns OFF
the power.
4
kHz MHz
Displays the level of volume.
Lights up when the unit is connect to MIC IN
connector.
Shows various information about the currently
selected source.
Displays the front, center, surround, surround center,
and subwoofer.
5 6
VOLUME
MUTE
dB
ftms SW
L C R
SL SR
SC
9
7