Configuring of SNMP Service
a)
Press the "Start" button, highlight "Settings", and select "Control Panel".
b)
Double click on the "Administrative Tools" icon.
c)
Double click on the "Services" icon.
d)
Highlight "SNMP Service", select "Properties" from the "Action" menu. Set the
following SNMP configuration parameters in the "Traps" page:
– Community Name
– Trap Destinations
e)
Set the following SNMP configuration parameters in the "Security" page:
– Accepted community names
– Accept SNMP packets from any host
NOTE:
the "Security" page, please add the loop back IP address (127.0.0.1) in
addition to the hosts to be added.
When setting "Rights" of the "Accepted community names", please
select "READ_WRITE" or "READ_CREATE".
The NEC ESMPRO Agent needs to communicate with SNMP service
through the loop back IP address locally.
When "Accept SNMP packets from these hosts" is checked on
Installing the NEC ESMPRO Agent 7