Sharp PA-VR5E Operation Manual page 27

• Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the U.S. and/or other
countries.
Connecting the digital voice recorder to a personal computer
To connect to a PC, purchase a commercially available USB cable
(USB (A) male-USB (Mini-B) male).
• Do only connect USB cable less than 1.2 m to the digital voice
recorder.
Plug the smaller connector of the USB cable into the USB
1
jack of the digital voice recorder.
Plug the larger connector into a USB port on your personal
2
computer.
Notes:
• Do not force the USB connectors when inserting them. If the
connector cannot be plugged in easily, make sure it is not upside
down.
• Connect the digital voice recorder directly to a USB port on your
PC using a USB cable.
• Make sure the digital voice recorder is powered on before
connecting it to your PC.
• Make sure the recorder is not connected to the PC during
recording or playback.
Folder structure when connected to a PC
When the recorder is connected to a PC, it appears as a removable
drive in Microsoft Windows. The recordings are stored on this
removable drive in the folder structure shown below.
..........................
26
.....................
...........
...........
...........
...........
...........
...........
Removable drive
SACM folder
1 folder
Corresponds to folder 1 on the recorder
2 folder
Corresponds to folder 2 on the recorder
3 folder
Corresponds to folder 3 on the recorder
4 folder
Corresponds to folder 4 on the recorder
NONVOICE folder
Used for recorder operations
SETTINGS folder
Used for recorder operations