Installing The Optional Printer Upgrade Kit; Checking Packed Components And Accessories - Sharp AL-1000 Series Operation Manual

INSTALLING THE OPTIONAL PRINTER
UPGRADE KIT
To install the printer board and memory, be sure to follow the precautions below.
1

Checking packed components and accessories

Open the carton and check if the following components and accessories are included.
Printer board ... 1
Screws ... 4
* In some models, the memory has been already installed in the machine and is not supplied
in the printer upgrade kit (AL-10PK).
4
Be sure to turn off this machine and your computer and remove the power cord
before starting installation. If not, an electric shock or injury may result.
Do not touch the chips, circuits, and connectors on the printer board and
memory board directly with your hands. Doing so may damage them through
static electricity.
Discharge the static electricity in your body by touching a grounded
metal part before starting installation.
To protect the printer board and memory from static damage, remove them
from protective bags just before starting work.
Do not touch any object which easily generates static electricity (such as a
computer display) with your hand.
Do not subject the printer board and memory to undue shock.
Do not put the printer board or memory in a location which easily
generates static electricity (such as on a carpet).
Memory ... 1*
Operation manual ... 1
If anything is damaged or not included, contact your SHARP Service Center.
Printer driver
(CD-ROM) ... 1
Interface cable ... 1
(for IBM PC/AT or compatible computers)
Screwdriver ... 1