Ap-175 Tel Placement; To Detect Access To Restricted Ports; To Detect Opening Of The Chassis Cover - Dell PowerConnect W-Series FIPS Manual

Figure 19 - Aruba AP-105 Tel placement bottom view

3.2.5 AP-175 TEL Placement

This section displays all the TEL locations of the Aruba AP-175. The AP-175 requires a minimum of 6
TELs to be applied as follows:
3.2.5.1

To detect access to restricted ports:

1. Spanning the USB console port
2. Spanning the power connector plug (AP-175P only)
3. Spanning the hex screw
3.2.5.2

To detect opening of the chassis cover:

4. Spanning the top and bottom chassis covers on the left side
5. Spanning the top and bottom chassis covers on the right side
Following is the TEL placement for the AP-175:
Figure 19 - Aruba AP-175 Tel placement front view
23