Frigidaire FFHB2740PE Use And Care Manual page 9

To level the doors using the adjustable
lower hinge (select models):
1 Remove all food items from door bins on
door being adjusted.
2 Open doors to 90 degrees.
3 Loosen or remove screw.
Loosen or Remove
Open
Door
90
Degrees
Loosen/Remove Screw (where applicable)

NOTE
Adjustable hinge should only be used after
doors have been leveled with rollers.
4 Lift the door while adjusting the washer.
To raise the door, rotate washer clockwise
(when viewed from the bottom). To lower
door, rotate washer counter-clockwise
(when viewed from the bottom).
Lower
Door
Hinge
Washer
Raising/Lowering Door
Screw
Bottom of Door
Raise
Door
INSTALLATION
To adjust the flipper mullion:
1 Loosen the screw located on the flipper
mullion hinge.
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
2 Adjust flipper mullion height. For proper
connection with the flipper mullion guide,
there should be a separation about the
thickness of a coin (0.060 inches, or
1.5 mm) between the guide and flipper
mullion.
Flipper
Mullion
Adjusting Flipper Mullion Height
3 Re-tighten screw.
Flipper
Mullion
Screw
Mullion
Guide
Thickness
of a Coin
9