Dell XPS /Dimension Gen 5 Owner's Manual page 74

DVI connector
5
VGA connector
6
security cable slot
7
padlock ring
8
optional modem
9
connector
10 sound card connectors
power connector
11
IEEE 1394 connector
12
keyboard connector
13
mouse connector
14
USB 2.0 connectors (5)
15
card slots
16
power supply fans
17
74
Removing and Installing Parts
If your monitor has a DVI connector, plug it into the DVI connector on the computer. If
your monitor has a VGA connector, plug it into the VGA connector on the computer.
If your monitor has a VGA connector, plug it into the VGA connector on the computer.
If your monitor has a DVI connector, plug it into the DVI connector on the computer.
Use a security cable with the slot to help secure your computer.
Insert a padlock to lock the computer cover.
If you have a modem, connect a telephone cable to the modem connector (optional).
NOTE:
For optimum performance, install a modem card only in PCI slot 2, 3, or 4.
NOTE:
Do not plug a telephone cable into the network connector.
• Line-in connector — Use the blue line-in connector to attach a record/playback
device such as a cassette player, CD player, or VCR.
• Microphone connector — Use the pink microphone connector to attach a personal
computer microphone for voice or musical input into a sound or telephony program.
• Line-out connector — Use the green line-out connector to attach headphones and
most speakers with integrated amplifiers.
• Surround sound connector — Use the black surround connector to attach
multichannel-capable speakers.
• Center/Low-Frequency Effects (LFE) connector — Use the yellow center/LFE
connector to attach your subwoofer.
Insert the power cable.
Attach high-speed serial multimedia devices, such as digital video cameras.
If you have a standard keyboard, plug it into the purple keyboard connector. If you have a
USB keyboard, plug it into a USB connector.
Plug a standard mouse into the green mouse connector. Turn off the computer and any
attached devices before you connect a mouse to the computer. If you have a USB mouse,
plug it into a USB connector.
Use the back USB connectors for devices that typically remain connected, such as
printers and keyboards.
It is recommended that you use the front USB connectors for devices that you connect
occasionally, such as joysticks or cameras.
Access connectors for any installed PCI cards (three slots) and PCI Express cards
(one x16 slot, one x4 slot, and one x1 slot).
For optimal cooling, two power supply fans are provided. Do not block the vents.