JVC KW-NSX700 Instruction Manual

JVC KW-NSX700 Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KW-NSX700:
Table of Contents

Advertisement

MONITOR WITH DVD RECEIVER
MONITOR CON RECEPTOR DE DVD
MONITEUR AVEC RÉCEPTEUR DVD
KW-NSX700/KW-NSX600
For canceling the display demonstration, see page 5.
Para cancelar la demonstración en pantalla, consulte la página 5.
Pour annuler la démonstration des affichages, référez-vous à la page 5.
MODE D'EMPLOI
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
LVT2397-001A
[J]

Advertisement

Table of Contents
loading

Summary of Contents for JVC KW-NSX700

  • Page 1 MONITOR WITH DVD RECEIVER MONITOR CON RECEPTOR DE DVD MONITEUR AVEC RÉCEPTEUR DVD KW-NSX700/KW-NSX600 For customer Use: For canceling the display demonstration, see page 5. Para cancelar la demonstración en pantalla, consulte la página 5. Enter below the Model No. and Pour annuler la démonstration des affichages, référez-vous à...
  • Page 2 However, there is no • Only for KW-NSX700: Excessive sound pressure from guarantee that interference will not occur in a particular earphones or headphones can cause hearing loss installation.
  • Page 3: How To Reset Your Unit

    Cautions on the monitor: How to reset your unit • The monitor built in this unit has been produced with KW-NSX700 high precision, but it may have some ineffective dots. This is inevitable and is not considered defective. • Do not expose the monitor to direct sunlight.
  • Page 4: Table Of Contents

    Turning on/off the AV source ......10 Memorizing/recalling the settings ..... 50 Monitor panel operations — Open/Tilt (Only for Updating the system ........... 51 KW-NSX700) ............10 Adjusting the touch position ......51 Touch screen operation ........10 Switching screens ........11 Information for using Bluetooth®...
  • Page 5: Introductions

    When you power on the unit for the first time or reset Finish the procedure. the unit, the initial setting screen appears. • You can also change the settings on the <Settings> screen. ( page 47) The <HOME> screen is displayed. •...
  • Page 6: Setting The Clock

    Display the <HOME> screen. Set the clock time. On the monitor panel: To synchronize the clock time with KW-NSX700 KW-NSX600 FM RBDS On the source control screen: To set the clock manually Display the <Settings> screen. 1 Select the time display format...
  • Page 7: Component Names And Functions

    KW-NSX700 Monitor panel Screen (touch panel) 1 0 (Eject) button button Displays the <Open/Tilt> screen. ( page 10) • Displays the phone control screen. (Press) 2 VOLUME –/+ button page 57) Adjusts the audio volume. ( page 9) • Activates the voice dialing. (Hold) (...
  • Page 8: Kw-Nsx600

    KW-NSX600 page 52 Screen (touch panel) Monitor panel 1 Loading slot button 2 0 (Eject) button • Displays the phone control screen. (Press) Ejects the disc. page 57) 3 HOME/ button • Activates the voice dialing. (Hold) ( page 57) 6 VOLUME/ATT knob ( •...
  • Page 9: Common Operations

    Adjusting the volume To adjust the volume (00 to 50) KW-NSX700 Decrease Increase • Only for KW-NSX700: You can also turn off the screen (Hold to decrease (Hold to increase by holding DISP on the monitor panel. continuously) continuously) To turn on the screen...
  • Page 10: Turning On/Off The Av Source

    A Video control menu The AV source is turned off. Monitor panel operations — Open/Tilt (Only for KW-NSX700) B Source control screen for video playback • The operation buttons disappear by touching the screen or when no operation is done for about 10 Opens the monitor panel.
  • Page 11: Switching Screens

    Source control screen Common operating buttons Displays the screen of connected smartphone. ( page 37) Displays the screen of App from the connected iPod touch/iPhone. ( page 30) Displays the phone control screen. page 57) Displays the sound adjustment screen. page 39) Activates/deactivates TA standby reception •...
  • Page 12: Av Source Operations

    KW-NSX600 KW-NSX700 page 38 Switches to the radio broadcast. TUNER ( page 13) DISC ( page 17) Plays a disc. Displays your smartphone screen on the touch panel screen. Smartphone ( page 35) USB ( page 24) Plays files on a USB device.
  • Page 13: Listening To The Radio

    Preparation: Select the appropriate tuner channel interval for <Area Setting>. ( page 15) DX/LO indicator ST/MO indicator Standby reception indicator The station frequency currently tuned Preset no. in/PS (station name) for FM RBDS when PS signal is coming in Band PTY code for FM RBDS Preset list page 16...
  • Page 14 When an FM stereo broadcast is hard to When the FM reception is interfered... receive... Activate monaural mode for better reception. Auto Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Activate monaural mode to improve FM reception, but the stereo effect will be Wide Subject to the interference from lost.
  • Page 15: Manual Presetting

    Changing the tuner channel Storing stations in memory interval You can preset six stations for each band. Tuner channel interval changes depending on the area Automatic presetting — SSM (Strong- you use this unit. station Sequential Memory) (For FM only) (Hold) Local stations with the strongest signals are searched Select this when using in North/...
  • Page 16 Selecting a preset station Activating/deactivating TA Standby Reception TP indicator Also changes preset stations TP indicator TA Standby Reception The following features are available only for FM RBDS stations. Lights up The unit will temporarily switch to Traffic Announcement (TA) if Searching for FM RBDS program—...
  • Page 17: Disc Operations

    • If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc Ejecting a disc KW-NSX700 KW-NSX700 KW-NSX600 To open the panel, page 10.
  • Page 18: Playable Disc Types

    Playable disc types Disc type Recording format, file type, etc. Playable DVD-Video * • DTS sound cannot be Region Code: 1 reproduced or emitted from DVD-Audio/DVD-ROM this unit. DVD Recordable/Rewritable DVD-Video (DVD-R/-RW * , +R/+RW * DVD-VR * • DVD Video: UDF bridge DivX/MPEG1/MPEG2 •...
  • Page 19: Playback Operations

    Playback operations • When the operation buttons are not displayed on the screen, press FNC on the monitor panel or touch the area shown on the illustration. To hide the operation buttons, press FNC on the monitor panel. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Playback mode Playing time Audio format...
  • Page 20 For CD/MP3/WMA/WAV Playing time Playback mode ( page 22) Playback status (3: play / 8: pause ) DISC IN indicator Audio format Media type • MP3/WMA/WAV: Folder no./Track no. • CD: Track no. While playing, the jacket picture is Track/file information shown if the file has the tag data •...
  • Page 21: Video Menu Operations

    Video menu operations [Top Menu] Displays the disc menu (DVD)/original program (DVD-VR). You can display the video menu screen during video playback. Displays the menu/playlist/original • Available items on the screen differ depending on the program/scene selecting screen. types of the loaded disc and playback files. below) •...
  • Page 22 Only for VCD Selecting playback mode For DVD/DVD-VR Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/ WMA/WAV Selects Random Selects Repeat playback mode* playback mode* * You cannot activate the repeat mode and the random mode at the same time. Direct selecting buttons ( below) •...
  • Page 23: Settings For Disc Playback

    : Plays back audio files and DivX/MPEG1/MPEG2 files. • For playable file types, page 18. • If the disc contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture. * Only for KW-NSX700.
  • Page 24: Usb Operations

    • Do not use a USB device with 2 or more partitions. • Depending on the shape of the USB devices and * Except for MPEG2 files recorded by JVC Everio connection ports, some USB devices may not be camcorder (extension code <.mod>).
  • Page 25 • When the operation buttons are not displayed on the screen, press FNC on the monitor panel or touch the area shown on the illustration. To hide the operation buttons, press FNC on the monitor panel. • To change settings for video playback, page 43.
  • Page 26: Listening To The Ipod/Iphone Device

    Select an appropriate input setting for <AV Input> – iPod classic according to the connection method of the iPod/iPhone. – iPod nano (6th Generation) • Only for KW-NSX700: Make sure that “AV Off” is – iPod nano (5th Generation) selected as the rear source. ( page 38) –...
  • Page 27: Setting Ipod Control Mode

    26) only for the following iPod/iPhone may not be performed correctly or as intended. In models: – iPod nano (6th Generation) this case, visit the following JVC web site: <http:// – iPod touch (4th Generation) www3.jvckenwood.com/english/car/> (English – iPod touch (3rd Generation) website only) –...
  • Page 28: Ipod/Iphone Playback Operations For Mode

    iPod/iPhone playback operations for <Head> mode • When the operation buttons are not displayed on the screen, press FNC on the monitor panel or touch the area shown on the illustration. To hide the operation buttons, press FNC on the monitor panel. •...
  • Page 29: Ipod/Iphone Playback Operations For Mode

    Selecting a track/video from menu iPod/iPhone playback on the iPod/iPhone operations for <iPod Out> mode • Connect the iPod/iPhone using KS-U30 (separately purchased). ( page 73 ) • Select [iPod] for <AV Input>. ( page 26) Select the menu (audio or video) (1), a •...
  • Page 30: Using An App Of Ipod Touch/Iphone

    73 ) • Select [iPod] for <AV Input>. ( page 26) • For Apps you can use on this unit, visit <http://mobile.jvc.com >. • When you use an App of the iPod touch or iPhone, Start App on your iPod touch/iPhone.
  • Page 31 On <HOME> screen: <Display Input> screen. On source control screen: • Only for KW-NSX700: You can also view the screen of App by pressing DISP on the monitor panel. • When <Input> is set to [iPhone], the [Apps] button is shown on the <HOME> screen, and the To erase the screen of App ] button is shown on the source control screen.
  • Page 32: Pandora® Operations

    Preparation Install the latest version of the Pandora application on your iPhone/iPod touch/Android/BlackBerry. Station name/Playing time Playback status ( 3: play/8: pause) Track information • Touching the information bar scrolls the text if not all of the text is shown. The picture data is displayed if available from the current content and when iPhone/iPod touch is connected via USB.
  • Page 33 Adding a station from the <Genre List> to Requirements for Pandora® the <Station list> iPhone or iPod touch • Use an Apple iPhone or iPod touch running under The screen shows the genres sent by the connected iOS3 or later. device.
  • Page 34: Using Other External Components

    • When the operation buttons are not displayed on the screen, press FNC on the monitor panel or touch the area shown on the illustration. To hide the operation buttons, press FNC on the monitor panel. • To change settings for video playback, page 43.
  • Page 35: Using The Smartphone

    You can connect your smartphone and view the smartphone screen on the monitor of this unit. To use a navigation application of the smartphone, connect the GPS antenna (only for GPS-compatible smartphone applications in “MirrorLink”). ( page 74 ) Notes on volume adjustment: •...
  • Page 36 <HOME> • When <Smartphone> is set to [MirrorLink], a screen combination of your smartphone screen and control • Only for KW-NSX700: Make sure that “AV Off” is buttons appears. selected as the rear source. ( page 38) •...
  • Page 37 • To adjust the picture, page 44. To erase the smartphone screen KW-NSX700 KW-NSX600 • Only for KW-NSX700: You can also restore the AV source screen by pressing DISP on the monitor panel.
  • Page 38: Rear Source Operations (Only For Kw-Nsx700)

    You can enjoy the rear source playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT jacks, while listening to any source. Displaying rear source images on While activating rear source... • To view a front source image on the rear monitor, the external monitor press [Same as Front].
  • Page 39: Sound Adjustment

    Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV •...
  • Page 40: Adjusting The Crossover Frequency

    Adjusting the sound precisely Adjusting the crossover Perform steps and of “Selecting a frequency preset sound mode,” then... On <HOME> screen: Select a band. Adjust the sound. Select the item to adjust, then make adjustments. Adjusts the crossover for front or rear speakers (high pass filter).
  • Page 41: Changing Display Design

    You can change the background, the color of text, touch panel buttons, and monitor panel buttons. On <HOME> screen: 2 Select/ the color adjust Color palette Dimmer setting: You can make selections for each dimmer setting—[ ] (Dimmer On) or [ (Dimmer Off).
  • Page 42 Using your favorite scene as the Capture the image displayed on the background screen. While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content, images from iPod/iPhone, or videos/JPEG from a smartphone.
  • Page 43: Setting For Video Playback

    You can change the setting for video playback. Adjusting the picture Adjust the picture (–15 to +15). You can adjust the picture quality. For the AV source Adjusts the brightness Adjusts the contrast Display the adjustment menu. Adjusts the blackness Adjusts the color Adjusts the tint * Adjusts the detail...
  • Page 44 For the smartphone screen Select [ ] (dimmer on) or [ ] (dimmer off). On <HOME> screen: Adjust the picture (–15 to +15). Adjusts the brightness Adjusts the blackness Display the adjustment menu. • You can also display the adjustment menu by pressing FNC on the monitor panel.
  • Page 45: Changing The Aspect Ratio

    Changing the aspect ratio Zooming the picture You can change the aspect ratio for video playback. You can zoom the picture (<Full>, <Zoom1> to <Zoom3>). • When <Aspect> is set to <Panorama> or <Auto> ( the left column), the picture is zoomed with the aspect ratio of the <Full>...
  • Page 46: Using A Rear View Camera

    ( pages 43 and 45) view camera The rear view screen is displayed when you shift the To erase the rear view screen gear to the reverse (R) position. KW-NSX700 KW-NSX600 • To erase the caution message, touch the screen.
  • Page 47: Setting Menu Items

    : Deactivates the built-in amplifier. Speaker Select Select the size of the connected speaker. Standard/Narrow/Middle/Wide Only for KW-NSX700: Also turn off the rear source. To change the setting, turn off the AV source by pressing [AV Off] on the <HOME> screen beforehand.
  • Page 48 LINE IN/VIDEO IN jacks or the iPod/iPhone connected by using USB 2.0 cable. iPod : Select to use the iPod/iPhone connected by using JVC KS-U30. “Please Power Off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
  • Page 49 Menu item Selectable setting/item Initial: Underlined Camera Input : Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. : Select this when no camera is connected. Display Input Change the settings for displaying the screen of App of the connected iPod touch/iPhone or the smartphone screen.
  • Page 50: Memorizing/Recalling The Settings

    Memorizing/recalling the settings You can memorize the following settings: • Settings on the <Settings> screen: Fader/Balance, Equalizer, Loudness, Crossover (HPF/LPF/SW Level), Volume Adjust, Speaker Select, Dimmer, Display Design, Smartphone, AV Input, Camera Input, Display Input • Settings for “AV-IN”: AV-IN Name Memorizing your settings Recalling your settings •...
  • Page 51: Updating The System

    Updating the system Adjusting the touch position You can update the system by connecting a USB device You can adjust the touch position on the touch panel if containing an update file. the position touched and the operation performed do not match.
  • Page 52: Bluetooth Operations

    Bluetooth version of the receive more information about Bluetooth, visit device. the following JVC web site: <http://www3. • This unit may not work for some Bluetooth devices. jvckenwood.com/english/car/> (English website • Connecting condition may vary depending on only) circumstances around you.
  • Page 53: Connecting Bluetooth Devices

    Connecting Bluetooth devices Registering a new Bluetooth device Pairing a Bluetooth device using SSP (for Bluetooth 2.1) When you connect a Bluetooth device to the unit When the Bluetooth device is compatible with for the first time, make pairing between the unit Bluetooth 2.1, pairing request is sent from an available and the device.
  • Page 54 Connecting/disconnecting a Change the PIN code. • You can skip changing the PIN code. registered Bluetooth device • The maximum digit of the PIN code that can be Display the <Bluetooth Setup> screen. set is 16. page 53) To connect Select [Connect] for the target device, and then select the device you want to connect.
  • Page 55: Setting Up Bluetooth

    53) • Touch the current PIN code, enter a new PIN code, then press [Save]. Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit. Device Address Shows the MAC address of the unit. Auto Connect : The connection is automatically established with the last connected Bluetooth device when the unit is turned on.
  • Page 56: Using The Bluetooth Mobile Phone

    • This adjustment does not affect the volume level of the other sources. • To adjust the volume of calls/earpiece, use VOLUME –/+ (for KW-NSX700), or VOLUME/ATT knob (for KW- NSX600) on the monitor panel. Rejects the call Switching between handsfree mode •...
  • Page 57: Making A Call

    Making a call Direct number entry Deletes last entry On the source control screen: Hold: Adds “+” • You can also display the phone control screen by Presets the entered phone number on pressing [ Phone] on the <HOME> screen or the preset list ( page 59) on the monitor panel.
  • Page 58 Using the preset list/phone book/call lists Select the initial. Preset From preset list From dialled call list. From received call list. Displays the other letters From missed call list. Select a phone number from the list. From phone book. • For copying the phone book, page 59.
  • Page 59 Presetting the phone numbers Copying the phone book You can preset up to 6 phone numbers. You can copy the phone book memory of a mobile phone into the unit (up to 400 entries). On the source control screen: On the source control screen: Select an item from phone book/call lists.
  • Page 60: Settings For Using Bluetooth Mobile Phones

    Deleting the phone number entries About mobile phones compatible in the unit with Phone Book Access Profile (PBAP) If your mobile phone supports PBAP, the phone Display the preset list/phone book/call book and call lists are automatically copied to the list you want to delete.
  • Page 61: Using The Bluetooth Audio Player

    Using the Bluetooth audio player • To register a new device, page 53. • To connect/disconnect a device, page 54. Status of the device/Battery reminder Playback mode * below) (only when the information comes Track no./Playing time from the device) Playback status (3: play / 8: pause) page 52...
  • Page 62: Reference Maintenance

    Caution on cleaning the unit To keep discs clean Do not use any solvent (for example, thinner, benzine, A dirty disc may not play correctly. etc.), detergent, or insecticide. This may damage the If a disc does become dirty, wipe it with a monitor or the unit.
  • Page 63: More About This Unit

    File playback Playing MP3/WMA/WAV files • This unit can play back files with the extension code Playing DivX files (for discs only) <.mp3>, <.wma>, or <.wav> (regardless of the • This unit can play back DivX files with the extension letter case—upper/lower).
  • Page 64 Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/REAR OUT/FRONT OUT/2nd AUDIO OUT*) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. * Only for KW-NSX700. Language codes (for DVD/DVD-VR language selection) Code...
  • Page 65 • Font for this product is designed by Ricoh. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 66: Troubleshooting

    What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). If the following messages appear Message Remedy/Cause...
  • Page 67: Listening To The Radio

    If there seems to be a problem Symptom Remedy/Cause No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. No picture is displayed on the screen. Turn on the screen. ( page 9) The unit does not work at all.
  • Page 68 Select [iPod] for <AV Input>. ( page 48) • Videos cannot be played. • Connect with USB Audio and Video cable JVC KS-U30. • No sound of videos come out. Other cables cannot be used. • Select [iPod] for <AV Input>. ( page 48) No picture appears on the screen.
  • Page 69 Symptom Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while •...
  • Page 70: Connection/Installation

    Before installing the unit Supplied accessories Precautions on installation and connection 1 Wiring harness x 1 2 Trim plate x 1 • Mounting and wiring this product requires skills and 3 Extension wire x 1 experience. For best safety, leave the mounting and 4 Extraction keys x 2 wiring work to professionals.
  • Page 71 The unit may be damaged sleeve or fail to work if you share the · wires or ground Step 1 and 2 are only performed for KW-NSX700. them to any metal part in the car. For KW-NSX600, skip to Step 3.
  • Page 72: Connection

    Connection page 73 page 73 Purple with white stripe Connect to vehicle’s reverse lamp harness page 74 when using the optional rear view camera. page 73 Antenna cord pages 73 – 74 Light green Extension wire (3) For best safety, be sure to connect the parking sensor.
  • Page 73 Rear view camera input Video output (Yellow) Audio Video input (AV-IN) • Video input (Yellow) • Audio left input (White) Only for KW-NSX700: • Audio right input (Red) 2nd Audio output (ф3.5 mini plug) Resistance-free stereo type mini plug Connecting a USB device/iPod/iPhone USB device (commercially available) USB 2.0 cable (accessory...
  • Page 74 Connecting a smartphone and GPS antenna Tape (-) • Fasten the connector Smartphone with the tape so that the (commercially cable will not come off. available) GPS antenna KV-GP10 (separately purchased) Smartphone extension cable (0) • Do not use other than the supplied cable (1.5 m).
  • Page 75: Installing/Removing The Unit

    • Tighten the screws firmly to prevent the unit from falling off. KW-NSX700: Removing the unit Detach the trim plate (2). Only for KW-NSX700: Open the monitor panel beforehand. ( page 10) Extraction keys 4 KW-NSX600: Extraction keys 4...
  • Page 76: Specifications

    USB Standards USB 2.0 Full Speed Data Transfer Rate Full Speed Maximum 12 Mbps Low Speed Maximum 1.5 Mbps Compatible Device Mass storage class Compatible File System FAT 32/16/12 Max. Current DC 5 V Only for KW-NSX600. Only for KW-NSX700.
  • Page 77 Allowable Operating Temperature 0°C to +40°C (32°F to 104°F) Dimensions (W × H × D) Installation Size (approx.) KW-NSX700: 182 mm × 111 mm × 160 mm (7-3/16” ×4-3/8” × 6-5/16”) KW-NSX600: 182 mm × 111 mm × 163 mm (7-3/16”...
  • Page 78 nh ng qu c gia mà b n có th s d ng ch c n ng Bluetooth ®...
  • Page 79 Andorra Ireland Sverige Éire Singapore India Australia Singapura Österreich Ísland Slovenija Bosna i Hercegovina Italia Slovensko Belgien Belgique Lichtenstein Türkiye България Lietuva Brasil Luxemburg Canada United States of America Luxembourg Venezuela Schweiz Lëtzebuerg Suisse Vietnam Latvija Vi t Nam Chile Monaco South Africa Κύπρος...
  • Page 80 Call 1-800-252-5722...
  • Page 81 • Asegúrese de que “AV Off” esté seleccionado como your iPhone or iPod using the optional JVC KS-U30 fuente trasera (Sólo para KW-NSX700). cable (Sold Separately). If you purchased the KS- Réglage <AV Input>...
  • Page 82 Harmed intygar JVC KENWOOD att denna enhet [KS-UBTll [CE0984I HaCTORIJ10TO KENWOOD AeKIIap•pa, Tosa H3Aen•e PorIa presente, JVC KENWOOD declara que esta unidad star i overensstammelse med vasentliga egenskapskrav Niniejszym firma JVC KENWOOD oswiadcza, ie niniejsze [KS-UBT1 1 e s CbOTBems•e ocHOBHHTe H 3HCKBa•••"...
  • Page 83 H): 15 mm x 19 mm (5/8" x 3/4" 1/4") Hereby, JVC KENWOOO, declares that this K5-UBTI is in Harmed intygar JVC KENWOOD att denna K5-UBT1 star I compliance with essential requirements relevant Overensstammelse med de vasentliga egenskapskrav och Ovriga provisions of Directive 1999/5/EC.
  • Page 84 CAUTION The Bluetooth adapter (KS-UBT1) is inserted in the unit when shipped from the factory. When you remove the Bluetooth adapter (KS-UBT1) from the unit, store it in this bag. For removing the Bluetooth adapter (KS-UBT1 ), refer to the Instructions. c:!J-__ Bluetooth adapter (KS-UBTl)
  • Page 85 ·, . -:·-. "'' CA uTI 0 N ((!) CONNECT BLACK WIRE GND) TO GROUND FIRST. OTHERWISE, DAMAGE TO YOUR UNIT MAY OCCUR. ·INCORRECT CONNECnON CAUSES SERIOUS DAMAGE TO THIS UNIT PLEASE READ INSTALLATION/CONNECTION MANUAL CAREFULLY. CONNECT GROUND FIRST CONNECT OTHER WIRES METALUC BODY OR CHASSIS OF THE CAR CONNECT POWER CORD TO...
  • Page 86 JVC autorise. Adresse du Proprietaire· ............Apt. JVC warrants that this JVC product is free, under JVC vous garantit que ce produit est degage, sous Street App. normal use and maintenance, from any defects in...
  • Page 87 Ia responsabilite et les coOts pour un emballage adequat, !'expedition, ainsi que tous les coOts associes Ia livraison de l'equipement chez et depuis le detaillant JVC autorise le plus pres pour un service d'entretien. Receivers and Home Speakers purchased separately, Front Projection and Car Audio "ARSENAL"...
  • Page 88 TO OUR VALUED CUSTOMER-- THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER?

This manual is also suitable for:

Kw-nsx600

Table of Contents