Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. BL465c - ProLiant - 2 GB RAM
  6. Installation instructions

HP ProLiant BL465c Installation Instructions

Hp proliant bl465c generation 5 server blade installation instructions
Hide thumbs Also See for ProLiant BL465c:
1
2
3

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Technical White Paper
Enlarged version
HP ProLiant BL465c
Generation 5

Server Blade

Installation Instructions

© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 454507-001
October 2007 (First Edition)
Overview
Installation of a server blade requires the following steps:
Install and configure an HP BladeSystem c-Class
1.
enclosure.
Install any server blade options.
2.
Install interconnect modules in the enclosure.
3.
Connect the interconnect modules to the network.
4.
Install a server blade.
5.
Complete the server blade configuration.
6.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the server blade user guide.
Installing an HP BladeSystem c-
Class enclosure
Before performing any server blade-specific procedures,
install an HP BladeSystem c-Class enclosure.
The most current documentation for server blades and other
HP BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation).
Documentation is also available in the following locations:
Documentation CD that ships with the enclosure
HP Business Support Center website
(http://www.hp.com/support)
HP Technical Documentation website
(http://docs.hp.com)

Installing server blade options

Before installing and initializing the server blade, install any
server blade options, such as an additional processor, hard
drive, or mezzanine card. For server blade options
installation information, see the HP ProLiant BL465c
Generation 5 Server Blade User Guide on the Documentation
CD or on the HP website
(http://www.hp.com/go/bladesystem/documentation).

Installing interconnect modules

For specific steps to install interconnect modules, see the
documentation that ships with the interconnect module.

Advertisement

loading

Related Manuals for HP ProLiant BL465c

Summary of Contents for HP ProLiant BL465c

  • Page 1: Server Blade

    (http://www.hp.com/go/bladesystem/documentation). Installing interconnect modules For specific steps to install interconnect modules, see the © Copyright 2007 Hewlett-Packard Development Company, L.P. documentation that ships with the interconnect module. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

  • Page 2: Connecting To The Network

    Remove the blank. Interconnect bay numbering and device mapping Remove the enclosure connector cover. To support network connections for specific signals, install an interconnect module in the bay corresponding to the embedded NIC or mezzanine signals. Server blade Interconnect bay Interconnect bay labels signal NIC 1...

  • Page 3: Completing The Configuration

    Install the server blade. Completing the configuration To complete the server blade and HP BladeSystem configuration, see the overview card that ships with the enclosure.

This manual is also suitable for:

Proliant bl465c g5