D-Link DFE-550FX User Manual page 14

Adapter Function Test
Insert the DFE-550FX Software Diskette in an available drive
(here shown as drive A). At the DOS prompt (here shown as >),
key in:
> A:\DIAG.EXE
and <RETURN>. The opening screen of the Verification/
Diagnostic program will appear.
NOTE: Read the
README.TXT
the appropriate diagnostic program for your
operating system.
Review the reported configuration data before proceeding to
Step 3.
The Configuration Data screen also features a Diagnostic
Menu. Follow the cues at the foot of the screen to select and
run the Adapter Basic Diagnostic program.
function test results will appear onscreen. In the Loopback
test, test signals are intercepted and reflected at the MAC level
without reaching the network cable. If the results are normal,
then go ahead to the Network Operation test, starting with
Step 4.
D-Link DFE-550FX Adapter
, on the diskette, to choose
The adapter
7