Lan Settings - D-Link DHP-W311AV User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the DHP-W310AV and to configure the DHCP settings.
Device Name:
Enter the Device Name of this DHP-W310AV.
You will use this name to connect to it
through a web browser. The default name
is listed on your Wi-Fi Configuration Card.
LAN Connection
Use the drop-down menu to select Dynamic
Type:
IP (DHCP) to automatically obtain an IP
address on the LAN/private network. For
Static IP setup, see the next page.
IPv6 Connection Your Internet Service Provider (ISP) may
Type: require this to be set a certain way for
Internet access. Contact your ISP regarding
such requirements.
LAN IPv6 Address This shows the current IPv6 address of the
Settings: DHP-W310AV on your network.
Save Settings: Click Save Settings to save and activate the
new changes.
D-Link DHP-W311AV User Manual

LAN Settings

19