Powering The Pencentra 200; Removing And Installing A Battery Pack - Fujitsu PenCentra 200 User Manual
Pencentra 200 handheld pc pro user's guide
Hide thumbs
Also See for PenCentra 200:
- User manual (466 pages) ,
- Specification sheet (2 pages) ,
- Manual (204 pages)
Table of Contents
Advertisement
Powering the PenCentra 200
The PenCentra 200 can be powered by either its rechargeable battery pack or by AC
power adapter.
Removing and Installing a Battery Pack
To remove the PenCentra 200 battery pack, perform the following steps:
1. Save any active data and suspend your system.
2. Hold the system face down, with the arrow on the battery compartment pointing
towards you (see Figure 2-3).
PS/2-style
Port
3. Using the back end of the system pen (not the tip), push the spring-loaded battery
latch to the left.
4. While the battery latch is pushed to the left, slide the battery pack out of the
battery tray by pulling it towards you. When the battery is clear of the latch
mechanism, release the battery latch.
5. Resume system operation.
20
Using the PenCentra 200
Figure 2-3
Removing/Installing the Battery Pack
2
2
Battery Pack
Latch
Battery Pack
Advertisement
Table of Contents
