Extender Setup - D-Link DCS-931L User Manual

Section 3 - Configuration
This section allows you to setup and configure the wireless network extending feature of your camera. Extender Mode allows your camera to extend
the range of your existing wireless network. You can choose to use the same network name and settings as your existing wireless network, or you
can create a new one.
Enable Extender Check this box to enable Extender Mode.
Mode:
Host Wireless
This shows the name of the Host wireless network that the camera is
Network Name: connected to and will extend.
Extended Select an option:
Wireless • Same as Host Wireless Network Name: Your extended network will
Network Name use the same name and settings as your Host network. Your devices
(SSID):
can use the same wireless information to connect to both the Host and
Extended networks.
• Create a New Wireless Network Name: This allows you to manually
set the name and security used for the extended network. You will need
to add this information for each wireless device that connects to this
Extended network.
Maximum Set the maximum number of clients that are allowed to connect to the
Clients Allowed
extended network.
to Connect:
Security Mode: If you choose to Create a New Wireless Network Name, you can set your
wireless security options here.
D-Link DCS-931L User Manual

Extender Setup

26 26