Dell TrueMobile 2350 User Manual page 176

Type
Destination LAN IP
Address
Subnet Mask
Gateway IP Address
Hop Count
Back to Top
System Diagnostic
The type of routing. This can be either of the following:
LAN or WAN interface (INTF)
Static routing
Either an entire network or a specific IP address. An IP address ending in .0 refers to a
network.
Must follow the IP subnet mask rules
To communicate with an IP address matching the destination IP Address, the Dell Wireless
2350 Broadband Router sends all traffic through the gateway IP address listed here.
The number of routers the packet has passed through to its destination. Hop count is used to
measure the distance between a source and a destination. If there are 3 routers between the
source and the destination nodes, the hop count for the packet will be 3 when it arrives at its
destination node.
System Diagnostic