Dell PowerConnect B-RX4 Installation Manual

Dell PowerConnect W-IAP130 Series Instant Access Point

Installation Guide

The Dell PowerConnect W-Series W-AP134 and W-AP135 Instant access points support the IEEE 802.11n
standard for high-performance WLAN. These access points use MIMO (Multiple-in, Multiple-out) technology
and support existing 802.11a/b/g/n wireless services.
The Dell W-AP130 Series access points provide the following capabilities:
Virtual Controller technology

Wireless transceiver

Protocol-independent networking functionality

IEEE 802.11a/b/g/n operation as a wireless access point

IEEE 802.11a/b/g/n operation as a wireless air monitor

Compatibility with IEEE 802.3at PoE


Minimum Software Requirements

The W-AP130 Series access point requires Dell PowerConnect W-Instant 6.1.2.3-2.0.0.0 or later.

Package Contents

W-AP134 or W-AP135 access point

Installation guide (this document)

Dell PowerConnect W-Instant Quick Start Guide

9/16" Ceiling Rail Adapter

15/16" Ceiling Rail Adapter

NOTE: Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the
original packing materials. Use these materials to repack and return the unit to the supplier if needed.
NOTE: Additional mounting kits for use with the W-AP130 Series access points are sold separately. Contact your Dell sales
representative for details.
0511016-01 | January 2012 1