Line Termination - Dell 3000cn Color Laser Printer User Manual

Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
Disables the Hex Dump feature.
Off*
Enables the Hex Dump feature.
On
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Does not print in the draft mode.
Off*
Prints in the draft mode.
On

Line Termination

Purpose:
To add the line termination commands.
Values:
The line termination command is not added.
Off*
CR=CR, LF=LF, FF=FF
The LF command is added.
Add-LF
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
Add-CR
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR - XX
CR=CR-LF, LF=CR-LF, FF=CR-FF
Color Mode
Purpose:
To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not specified for the
print job that is sent to the printer.