TABLE OF CONTENTS Ä ¿ Â ¼ Important Safety Instructions Product Introduction General information Features listing Installation & Connection Panel Control Keys Remote control Basic Operation Instruction Power On Standby Signal Source Selection Menu Operation Instruction PICTURE SOUND ADVANCE Simple troubleshooting...
Important Safety Instructions Thank you to choose the LCD TV monitor made by our company, a valuable product with excellent quality and multiple functions. This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All machine are strictly tested before leaving factory.
Page 3
14 There is high voltage inside the machine but no parts which can be repaired by users themselves. In order to assure the people's safety, please don't open the case to repair it by yourself. If it is needed to repair, please contact qualified engineer to repair.
Product Introduction General information Having inter high quality sound boxes, which will give you purely audiovisual enjoyment and save your table place. Having many ideal connectors, you may directly connect your DVD, vidicon etc. its disport components of input connector let you enjoy beautiful image effect. The product can be used as a computer monitor with VGA or HDMI connectors.
Page 6
The Technical Specifications for Final Product The Technical Specifications for Final Product Panel size 23" Max. Resolution 1920 1080 Best resolution 1920 1080@60Hz Pixel pitch 0.2655mm 0.2655mm Active area 509.76mm 286.74mm Power adapter 100-240V 60/50Hz Volume 3W+3W TV receive system PAL+NTSC /PAL+SECAM Unpacking Dimension...
Power supply: Comply with EPA standard,compatible with VESA DPMS standard. Mode Power LED indicator Power consumption Standby Note: This specification is subject to change without notices. If there are differences between manual and real operation, please do according to real operation. Listing Please make sure that all of the following items are complete LCD TV MONITOR (Include base)
Installation & Connection Power Connection Plug one end of the power cord into the input port of the machine's power supply and then insert the other end into the socket of the electrical source ( AC 100V-240V, 60/50Hz). Notes: 1. When connecting the power cord, be sure to turn off the machine and other equipment's power. 2.
Page 10
Antenna Connection It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition pictures. Attention: Please turn off TV power before the outdoor antenna is connected to the TV signal input port. Outdoor antenna can't be located near the high-voltage wires.
Page 11
Computer Connection Please connect one end of VGA cord with the output port of the computer (available for both desktop or laptop computer), and another end of VGA cord with the input Audio/Video machine with HDMI interfaces port of the VGA on its rear cover. HDMI digital port Connection Connect external HDMI high signal source to HDMI digital input port of this machine through HDMI digital connector...
Page 12
AV1 Video Signal Connection Through composite cable, connect AV equipment VIDEO output termination to this machine VIDEO input, and AV equipment AUDIO output termination to this machine AUDIO input, respectively; Press "SOURCE" key to select "AV1" signal source. S-VIDEO Input Connection Through S-VIDEO/AUDIO cables to connect external AUDIO/VIDEO equipment to the machine's AUDIO/VIDEO input port, and press "SOURCE"...
Page 13
AV-OUT Connection If you need watch image of DV and connect your TV game machine, you can connect audio or video output end of DV and game machine to the monitor. CVBS, DVD Player or other machine with CVBS/S-Video. AV machine...
Page 14
YPbPr/YCbCr Input Connection If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output, recommends you to connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same time, please connect its audio output with TV audio input as shown in the following chart.
Page 15
Base installation Base equipment act as the picture. Equip the base with the machine according to arrow point, and lock the bolt tightly. Wall Mounting Stand Wall Mounting Board Wall Mounting subassembly installation Installation for VESA Wall Mounting 1. Take off the base subassembly 2.
Panel Control Keys 1. Remote Receiving Sensor. 2. Power Indicator. 3. TV/AV: Press this key to enter the menu of signal source and choose signal source. 4. MENU: Press this key to enter main menu. 5. VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under OSD operation. 6.
Remote control Function POWER MUTE POWER Turn on or standby Power Mute MUTE Eliminate sound Numerical key Number input button Freeze picture Numerical key Program list Look through or edit Program list SMART S Intelligent sound mode selection Program list STANDARD NEWS MUSIC...
Page 18
Remote control battery installation method: Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control battery box. Note: Appearance of the remote control may be different from this picture, please according to practicality. Precautions for use of remote control: 1.
Basic Operation Instruction Power On Plug power cord into the electrical socket, press '' '' button on right side lower part of the back cover , then press '' key on the front panel, or press ''Power'' key on the remote control to turn on the TV. Standby Press ''Power''key on the remote control.
Menu Operation Instruction Press ''MENU'' key on the remote control or on the front panel, then the TV will display the main menu. 1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' key on the front panel to select the adjustment sort menu, which P I C T U R E includes 5 sorts: PICTURE, SOUND, OSD, ADVANCE, TV.
Page 21
Special Attention 1. The Hue function is available only for NTSC system. 2. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue, and Sharpness will be saved automatically P I C T U R E by the machine as personal mode. C O N T R A S T Remote Control Shortcut Keys B R I G H T N E S S...
SOUND Select to enter the SOUND submenu. Press "Up/Down" key on the remote control or the key "CH+/CH-" on the front panel to choose what you need. Press the "Left / Right" key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value or state (see below table).
Select to enter the OSD submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the front panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value O S D or state (see below table).
ADVANCE Select to enter the ADVANCE submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the front panel to choose what you need. Press the "Left/Right" key on the remote control or the"VOL+/VOL-" key on the front panel to adjust analog A D VA N C E value or state (see below table).
Page 25
Select to enter the submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the front panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value or state (see below table).
Page 26
AUTO SCAN Select to enter the submenu of . Then press ''Up/Down'' key 5 3 . 0 0 MHZ on the remote control or ''CH+/CH-'' on the front panel to select AUTO SCAN ''. The machine perform search after pressing ''Right'' key on the remote control or ''VOL+''on the front panel.
Page 27
to select '' CHANNEL EDIT ''. Press ''Right'' key on the remote 0 0 1 0 1 1 0 2 1 control to enter submenu of '' CHANNEL EDIT '' (Press program 0 0 2 0 1 2 0 2 2 list key on the remote control to enter submenu of '' CHANNEL 0 0 3...
Page 28
Select Channels with Numeric Keys 1. Operations to select channels with 1 digit (0-9): Press the number keys (0-9)on the remote control to select TV channel directly . 2. Operations to select channels with 2 digits (10-99): Press the number keys with 2 digits (10-99) on the remote control to select TV channels. 3.
Simple troubleshooting Symptom Factor Solution 1.Antenna cable connector is loose, cable is damaged. 1.Check the antenna cable connector plug whether 2.Channel setting is incorrect. or not loose, cable whether or not perfect. 3.Antenna cable type is not 2.Refer to channel setting method, resetting again. Snowflake speckle and matching.
Page 30
Symptom Factor Solution Computer no display, and Check signal cable whether or not loose, fall off, prompt no signal input, red Signal cable is loose or fall off. reconnect well again. indicator LED twinkling. 1.Receive window of remote 1.Remove objects, avoiding cover the receive continue was covered by Remote control distance is window of remote control.