Sony VPL-EW225 Operating Instructions Manual page 23

Aspect
VPL-EW275/EW245/EW225
Input signal
4:3
16:9
16:10
4:3
16:9
*1: If you select "Normal," the image is
Recommended
setting value and
projected image
*1 *2 *3
Full1
*2: If you select "Full2," the image is projected
*1 *2 *3
Full1
*3: If you adjust the projected image position
*3
Full1
*4 *5
4:3
*4: Depending on the input signal, the
16:9
*5: Depending on the input signal, the image
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
to fit the projected image size, regardless
of the aspect ratio of the image.
using an image with 16:9 aspect ratio and
then switch the input source to 4:3 image,
the top and bottom edge of the image may
be hidden. In this a case, select "Full3."
projected image may be projected as
illustrated below. In this a case, select
"16:9."
may be projected as illustrated below. In
this a case, select "Zoom."
The Screen Menu
23