Table of Contents
Advertisement
3. Click [OK] button.
⇒
The window [ScanSnap! Monitor - Scan and Save Settings] closes.
4. Insert the business card into the ScanSnap! scanner.
Set card with the short side fed first so that the front of the card is facing the ADF paper
chute.
The front side is the side where the name is printed. Note that you can insert a batch of busi-
ness cards together.
5. Press
(for Duplex scanning) or
of ScanSnap!.
⇒
Scanning starts. The power lamp on the scanner blinks, and the following window opens
to show the scanning status.
Set front side down
ADF paper chute
Buttons
Power Lamp
(for Simplex scanning) button on the scanner
CardMinder for ScanSnap! User's Guide
3
10
Advertisement
Table of Contents
