Dell MU833 Troubleshooting Manual page 25

NOTE:
The printer drivers for the printer must either be on the computer system, or you must have
the drivers available on a CD.
9. In Properties, click OK to accept the default settings, or change the settings and then click OK.
You are now able to print from this computer to the Bluetooth printer.
Print from Another Bluetooth Device to a Standard Printer That
Is Physically Connected to This Computer
To print from another Bluetooth device to a standard printer that is physically connected to this
computer
1. Verify that the local printer is physically connected to this computer by a cable, is set as the default
printer, and is turned on.
2. From this computer, open My Bluetooth Places.
3. Click View My Bluetooth services.
4. Right-click My Printer, and then click Enable.
5. Refer to the manual that came with your Bluetooth device for instructions on how to print to another
Bluetooth device.
-or-
If you are using a Bluetooth enabled computer, see
NOTE: If the Secure connection property for the printer has been set on either computer, the operators of
both computers must be available to allow access and to supply the Bluetooth security code when requested
(see "Respond to Bluetooth Security and Authorization
automatically and it is not necessary to supply the security code.
Establish a Virtual Serial Port Connection Between This
Computer and Another Bluetooth Device
To establish a virtual serial port connection between this computer and another Bluetooth device
1. From this computer, open My Bluetooth Places.
2. Click Bluetooth Setup Wizard.
3. Click I know the service I want to use and I want to find a Bluetooth device that provides that
service, and then click Next.
4. In Bluetooth Service Selection, click Bluetooth Serial Port, and then click Next.
5. In Bluetooth Device Selection, click the name of the device you want to connect with, and then click Next.
6. Click Finish.
The operator of the remote device must be available to respond to any authorization requests (see
Bluetooth Security and Authorization
is associated with the connection and configure applications to use that port.
NOTE: Unless you have a specific reason to do so, do not change the default COM port setting.
To disconnect the virtual serial port connection between this computer and a remote Bluetooth
device
1. From this computer, open My Bluetooth Places.
NOTE: If there is a Bluetooth Serial Port shortcut in My Bluetooth Places, skip to step 4.
2. Click View devices in range.
"Print to a Bluetooth Printer from This
Messages"). Thereafter, access is granted
Messages") that are sent from this computer. Note the COM port name that
Computer."
"Respond to