Panasonic TY-TP10U Operating Instructions Manual page 9

Registration
Registration to the TV for this use is required when using the Touch
Pen for the fi rst time after purchase or using it on another TV.
1. Turn the (plasma) TV on to begin Touch Pen registration.
Before using, attach the supplied Bluetooth adaptor to
a plasma TV if it is not equipped with the Bluetooth
communication function. (
• For how to start registration of the Touch Pen, see the
operating instructions of the TV.
2. Press the power button with the Touch Pen turned off.
(When performing registration on another TV again, press
the power button for 5 seconds or longer.)
• Registration of the Touch Pen to the TV will start.
• The indicator lamp blinks in red and green alternately
during registration.
• Place the Touch Pen within 50 cm (1.6 feet) from the TV
during registration.
• The Touch Pen automatically turns off if registration fails
even if 2 minutes or more has elapsed.
3. When the indicator lamp blinks in green for approx. 3
seconds, registration is complete and the TV is connected at
the same time.
• After registration, when the Touch Pen is turned on near the
TV that is already on, it will be automatically reconnected to
the TV.
• If registration is cancelled on the TV, register it again.
page 11)
®
9