Hardware Environment - Fujitsu Ethernet 2.4 Installation Manual

Fujitsu ethernet installation guide
Hide thumbs Also See for Ethernet 2.4:
Table of Contents

Advertisement

4
110900-12
5
112838-11
6
118822-11
5) Unified Installer
* Related Files
Below files are included. The file path is from CD-ROM root.
- ./.FJSVclis/Disk1/cdsetup
- ./.FJSVclis/Product1/prodsetup
- ./.FJSVclis/Product1/admin
- ./.FJSVclis/Config1/I08FJSVgid.sh
- ./.FJSVclis/Config1/FJSVgid_config_readme.txt : Readme file of the script to set the operating mode.
- ./.FJSVclis/Config1/config/fjgi.sh
* Precondition
The files cdsetup and prodsetup are created in order to be called from the Unified installer.
* Required Product
- Enhanced Support Facility
When you install this CD-ROM by Unified Installer, please carry out to the host in whom required product has
simultaneously or already been installed.

3.2 Hardware Environment

The following hardware environments are required to use this software.
1) Main memory
Main memory of 64M bytes or more is required.
2) Hardware requirements
The following table shows the I/O devices that can use this software.
No.
1
GigabitEthernet Card
2
GigabitEthernet Port
Make sure that the above-mentioned GigabitEthernet card is set up before installing this software and complete card
recognition by "boot -r" command.
3.3 Static Disk Resources
The disk space requirements for this software are shown below.
3.3.1 Disk space requirements
The following table lists the disk space requirements for installing this software. If necessary, expand the size of the
appropriate file systems.
No.
1
/
2
/usr
3
/var
board installing the Quad GigabitEthernet card (PW008QG1), this
patch is needed.
On Solaris 8 OS, when PCI Hot Plug function is executed to the Quad
GigabitEthernet card (PW008QG1), this patch is needed.
On Solaris 9 OS, when PCI Hot Plug function is executed to the Quad
GigabitEthernet card (PW008QG1), this patch is needed.
On Solaris 10 OS, when PCI Hot Plug function is executed to the
Quad GigabitEthernet card (PW008QG1), this patch is needed.
Device Name
PW008GE4/PW0G8GE1/PW008GE5/
PW0G8GE2/PW008QG1
PRIMEPOWER250/450 secondary LAN port
Directory
Disk Space Requirement (in megabytes)
0.4
0
0.1
: The script for information about Product CD.
: The script to install Product CD.
: The file for package adding.
: The script to set the operating mode.
: The script for auto setting used by I08FJSVgid.sh.
Model
4
Remarks
-
-
Remarks
-
-
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pci gigabit ethernet 2.4

Table of Contents