GE AJCM 08,10 Owner's Manual & Installation Instructions page 21

Installation Instructions
[] INSTALL WINDOW GASKET AND
LOCKING BRACKET
_-] Cut the foam top window gasket to the window
width.
r_ stuff the foam between the glass and the window
to prevent air and insects from getting into the
room.
[] Attach the window locking bracket with
I type E screw.
r_ REPLACE AIR CONDITIONER
IN CASE
r_ Reinstall the locking plate with the tab behind
the wall case flange. Tighten the screw.
_1 Carefully slide the air conditioner back intOthe case. // Lo_N j /I I .(__1_
r_ Attach the power cord to the base pan with
the clamp.
r_ Reattach the front grille. An opening for the power
cord is on the bottom of the front grille.
r_ Fill holes and cracks with caulking provided by
the installer.
pan
Power cord
21