Kenmore 665.1472 Series Use & Care Manual page 9

6. Reinstall thetoeguard using theexisting mounting s crews
Trimless Panel with
Handle and I/2" washer. Then, reinstall the foot pedal.
Dimensions
Use these dimensions drawings to create a custom panel for
use without a trim kit. The panel should be
1/2" to 5/8"
(13 mm
to 16 mm) thick.
NOTE: A thicker panel may need rounded front corners and
a cutout for access to the handle.
A
C
2313/16''
(60.5 turn)
(38115mmr--*
Installation
1. Remove the mounting screws attaching the foot pedal to
the compactor. Remove foot pedal.
B
E
F
A. Handle
B. Custom panel
C. Panel screw locations
D. Toe guard
E _4/asher
E Toe guard mounting screw
Trimless Panel without Handle
Dimensions
Use these dimension drawings to create a custom panel for
use without a trim kit. The panel should be 1/2" (13 ram) rain.
thick.
A. Mounting screws
B. Foot pedal
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative
panel to the compactor. Remove decorative panel and
discard mounting screws.
4. Align the top of the custom panel with the bottom of the
handle.
5. Secure the custom panel from the back using 4 - #8 x 1"
wood screws as shown.
___ 15" ___
(38.1 crn)