Advertisement
MIC Series 500 Camera
The MIC 500 Series camera has a security attachment point for attaching to a safety chain
(not supplied), which in turn should be attached to a secure part of the structure during
installation or removal.
WARNING!
Use caution when installing the MIC 500 Series camera. Follow common sense precautions
such as fitting a safety chain.
1.2
Safety Earthing of the MIC 500 Series Camera
The electronics and housing of the MIC 500 Series camera are electrically isolated; however,
the housing should be safety earthed regardless. This safety earth should be a bonding
connection, such as one of the securing bolts, to the outside case of the camera. The camera
should be earthed at one point only to prevent earth loops and thus hum bars appearing on
the camera picture in the control room.
Shielded Composite Cable Connections
Note: all connections must be made.
Composite Cable Wire Color
1. Please refer to the MIC Series Power Supply Manual for details on connecting MIC 500 Series cameras with
Mains Power and Video Connections
Mains
Live
Neutral
Earth Connection
Video
Video BNC CN1
Core
Screen
Bosch Security Systems, Inc.
Red
Green
White
Yellow
Drain Wire
Blue
Violet
Coax Core
Coax Screen
Black (optional)
Orange (optional)
Brown
Gray
heaters and other auxiliary equipment.
HD1-1
HD1-2
Already made
Connection
Video to Control Room
Video GND to Control Room
User's Manual
MIC 500 Series Camera Quick Start Guide | en
Function
MIC PSU Terminal Block PCB Marking
AC supply
AC supply return
RX +
Rx -
Ground
Tx -
Tx +
Video
Video return
Tamper switch
Wash drive
Heater+
1
Heater-
HD3-1
Power
HD3-2
Power
Hd3-3
RxB
HD3-4
RxA
HD3-5
GND
HD3-6
TxA
HD3-7
TxB
HD3-8
Video
HD3-9
Vid 0V
HD3-10
Tamp Sw
HD3-11
Wash
HD6-1
HD6-2
F.01U.173.601 | 2.0 | 2010.11
5
Advertisement
