Asus E1816 User Manual page 19

6. Remove Switch: you can remove any switch in the topology list manually through
this function. It pops out a switch list and check those switches you want to
remove. Please refer to Figure 4.7 for the switch list window.
4.3.2 Setup
CNM polls the switch status periodically, the polling interval can be adjusted.
1. Auto Update Time Interval: as Figure 4.9, a proper value can be set. The auto
update time interval is used to poll the switch statistics and link status on the top
of the window. The interval value could be adjusted from 0 to 300 seconds. 0
means no polling at all. There is a tool bar button for it.
GigaX Smart Switch Centralized Network Management
Figure 4.7 Remove Switch
Figure 4.8. Setup
Figure 4.9 Auto Update Time Interval
19