Installation; Unpack Unit; Connect Unit To Ple-Series Two-Zone Mixer (Amplifier); Make Configuration Settings - Bosch Plena PLE-2CS Installation And User Instructions Manual

Plena Two-zone Call Station | Installation and User Instructions | Installation
3

Installation

3. 1

Unpack unit

1 Remove the unit from the box, and discard the
packaging material according to local regulations.
2 Use your fingernails to carefully peel off the
protective plastic film. Do not use sharp or pointed
objects.
3.2 Connect unit to PLE-series
two-zone mixer (amplifier)
1 Connect the Plena Two-zone Call Station to the
PLE-series two-zone mixer or mixer amplifier using
a Cat-5 Ethernet cable (see figure 3.1). Either one of
the RJ-45 sockets can be used.
figure 3. 1 : Connecting the call station to the mixer or
the mixer amplifier
3.3

Make configuration settings

1 Make the configuration settings (see section 4.2).
Bosch Security Systems | 2008-01 | PLE-2CS en
en | 9