Event Setup - D-Link DCS 6513 User Manual

Section 3: Configuration
In a typical application, when motion is detected, the DCS-6513 sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by various sources, such as motion detection. When an event is triggered, a specified action will be
performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP server.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-6513 User Manual

Event Setup

Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
(what to send)
ex.
Snapshot, Video Clips
Action
Media
(where to send)
ex.
Email, FTP
Server
53