Panasonic CF-19 Series Reference Manual page 8

Digitizer
<Only for model with digitizer>
You can use the digitizer function to perform the same operation as the touch pad and mouse. Touch the screen surface with
the pen (included).
For further information, click [start] - [All Programs] - [Get Going with Tablet PC].
To right-click
Press and hold the button (A) of the pen, and then tap the object.
A
NOTE
The digitizer function does not work in the Setup Utility, in the full screen of [Command Prompt], or in Recover Pro
( page 69).
Digitizer Calibration
1
Run [Tablet and Pen Settings].
Double-click
2
Click [Settings] - [Calibrate].
3
Using the pen, touch each of the four "+" target marks one by one, and then click [OK].
Perform the calibration for both [Landscape] and [Portrait].
NOTE
Perform the digitizer calibration for each user.
or click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].
8