Advertisement
General Care & Cleaning
Removing
and Replacing
the Lift-Off
Oven
Door
I__
The door is heavy. For safe, temporary
storage,
lay the door flat with the inside of the door facing
down.
Most oven doors contain
glass that can break.
Read the following
recommendations:
1.
Do not close the oven door
until aii the oven racks are
fully in place.
2.
Do not hit the glass with pots, pans, or any other object.
3.
Scratching,
hitting,
jarring
or stressing
the glass
may
weaken
its structure
causing
an increased risk of break-
age at a later time.
To Remove Oven Door:
|.
Open
oven door completely
(horizontal
with floor
- See
Figure 1).
,
Door Hinge locations with
oven door fully open
Figure
1
Puii the door hinge locks on both left and right door hinges
down from the oven frame
completely
towards
the oven
door
(See Figure 2). A tool such as a small
flat-blade
screwdriver
may be required.
Figure 2
3_
o
°
Firmly grasp both sides of oven door along the door sides
(Do not use the oven door handle - See Figure 3).
/
Around
_
//
Ovendoor
d I__/
Hinge
Figure
3
Close the door to the broil stop position (the oven door will
stop into this position just before fully closing).
With the oven door in the broil stop position,
lift the oven
door hinge arms over the roller pins located
on each side
of the oven frame (See Figure 4).
Roller pin
Hinge arm hook
Hinge arm notch
Slot bottom
Figure 4
To Replace
Oven Door:
1.
Firmly grasp both sides of oven door along the door sides
(Do not use the oven door handle - See Figure 3).
2.
Holding
the oven door at the same angle
as the removal
position, seat the hook of the hinge arm over the roller pins
located
on each side of the oven door frame
(See Figure
4). The hook of the hinge arms must be fully seated onto
the roller pins.
3.
Fully open the oven door (horizontal
with floor - See Figure
1).
4.
Push the door hinge locks up towards
and into the oven
frame on both left and right oven door hinges (See Figure
2) to the locked position.
5.
Close the oven door.
23
Advertisement
