Additional Audio Connections; Advanced Divx Connected Device Setup; Setting A Static Ip Address; Switching Between Wired And Wireless Connections - D-Link DSM 330 - DivX Connected HD Media Player User Manual

DivX Connected User Guide
If your television does not receive audio through the HDMI cable, connect the audio cables.
Device

Additional Audio Connections

You may use either of the following audio connections with your TV or receiver in conjunction with your
choice of video connection.
Digital Optical
•
Digital Coaxial
•

Advanced DivX Connected Device Setup

Follow these steps to configure the more advanced features of your DivX Connected device:

Setting a static IP address

•

Switching between wired and wireless connections

•
Supported encryption modes
•
Setting a Static IP Address
To setup and configure a static IP address:
Make sure you are viewing the device setup screen (press 'Setup').
•
Select 'Network' to view the network status screen.
•
Select 'Disable DHCP'; when disabled, the button will toggle to say "Enable DHCP".
•
Update the IP Address, Subnet Mask, and Default Gateway using the numbers and
•
(DELETE) keys on the remote control.
Choose 'Save' to preserve your settings.
•
Switching Between Wired and Wireless Connections
To switch from a wired to a wireless connection:
Note: These instructions assume you have previously set up a wireless connection to your PC and
that you already have a wired connection to the DivX Connected device.
8
Copyright © 2007, DivX, Inc., Confidential
DivX Connected User Guide
Television
S