Chapter 10
Installing or Replacing Components
Figure 10-1
1
Open the box.
2
Insert a foam cushion.
3
Insert the cardboard holder with the U-shaped
end facing upwards.
4
Insert the power supply unit with the small
end going in the box first.
OL-23069-07
Repacking a 6-kW AC Power Supply Unit
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Replacing an AC Power Supply Unit During Operations
5
Insert a foam cushion onto the top of the
power supply unit.
6
Fold the two narrow flaps over the top
cushion.
7
Fold the two wide flaps over the top of the
box.
8
Tape the wide flaps together and to the box.
10-5