Using The Wink Self-Timer - Canon IXUS 210 Hardware Manual

Using the Wink Self-Timer

Point the camera at the subject and press the shutter button fully. The
camera will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
•
Wink a bit slowly.
•
A wink may not be detected if eyes are covered by hair or a hat, or when
wearing glasses.
Choose .
●
Choose in Steps 1 – 2 on
touch .
, then touch Ú.
●
Touch
Compose the shot and press the
shutter button halfway.
●
Touch a face displayed on the screen to
choose a person to wink (Touch AF).
●
Press the shutter button halfway, and
confirm that a green frame appears
around the face of the person who will
wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
Face the camera and wink.
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's
face.
●
To cancel shooting with the timer after
countdown has started, touch the screen.
p. 54, then
61