Removing The Connector Cover; Connecting The Cables - Sony LMD-DM20C Instructions For Use Manual

Removing the
Connector Cover
1
Unlock the slide latch on the connector cover.
2
Slide the connector cover to the side to remove.
Slide latch

Connecting the Cables

1
Turn off the computer.
2
Connect the supplied DVI cable between the unit's
computer's DVI output connector.
Use the supplied DVI cable only. Otherwise,
resolution loss may occur.
When using a DisplayPort cable, connect the
DisplayPort cable between the unit's DisplayPort
connector and the computer's DisplayPort
connector.
The recommended cable length is 2 m (6.6 feet) or
less. If you use a long cable, the display may
Connector
become unstable and flicker.
cover
3
Connect the supplied power cable between the AC
IN socket and the wall outlet.
4
Turn on the unit and the computer.
Rear of the unit
Note
When using the optional calibration kit, connect the
supplied USB cable between the unit's UP port and the
computer's USB port. For details about connections,
refer to the instruction manual for the calibration kit.
DIGITAL (DVI input) connector and the
Note
Note
DVI cable (supplied)
or DisplayPort cable
To the wall outlet
Removing the Connector Cover / Connecting the Cables
Computer
15