Table of Contents
Advertisement
Dimensions
for built-in
area
Personal Injury/Property
Damage Hazard
. Unit is top-heavy and may tip
forward when the doors are
opened.
l
A
solid soffit or
2"
wood block is
required above the refrigerator
to prevent tipping during use.
. If solid soffit is more than 1 inch
above refrigerator, a wood block
must be installed on the wall not
more than i/4 inch above the
refrigerator cover.
Failure to follow these instructions
could result in personal injury or
property damage.
Width and depth of the built-in area
are determined by the type of
installation.
The built-in refrigerator
can be installed with the doors flush
with the wall, with the doors
protruding from the wall, or with side
panels enclosing refrigerator.
Select
one method of installation
and use
the dimensions
given for that
method as shown.
Height of built-in area can range
from a minimum of 82-l/2"
to 84-314':
Optional top grilles may be required
for enclosures
less than 83-5/8".
Height dimensions
with optional top
grilles are given on page 4.
+I- l/8" tolerance
Grou'nded
electrical
outlet location
Dimensions for tiwina Drol
' /mduct ti
87--i/w
I
II
92-ii3"
I
II
I
Wall
plumbing
location
locIpTv
Floor plumbing
,3,,
Electrical
oullet
should
be center&
within
shaded
area.
within
shade
Front
I
tipping
radius
I
/
Side
Page 3
Advertisement
Table of Contents
