Toshiba MK6025GAS User Manual

Toshiba MK6025GAS User Manual

2.5-inch hard disk drive
Hide thumbs Also See for MK6025GAS:

Advertisement

TOSHIBA AMERICA INFORMATION SYSTEMS
STORAGE DEVICE DIVISION
IRVINE, CALIFORNIA
MK6025GAS (HDD2189)
2.5-INCH HARD DISK DRIVE

USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba MK6025GAS

  • Page 1: User Manual

    TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK6025GAS (HDD2189) 2.5-INCH HARD DISK DRIVE USER MANUAL...
  • Page 2: Table Of Contents

    CONTENTS Introduction................1 Setup ..................2 Using the HDD .................4 Troubleshooting...............5 Specifications ................6 Drive Connectors..............8...
  • Page 3: Introduction

    INTRODUCTION – MK6025GAS (HDD2189) General Features • 2.5" sized drive • 60 Gigabytes • 9.5mm High • 12ms Average Seek Time • ATA-2,3,4,5,6 Interface • Supports high transfer rates of 100 MB/sec • 8MB Buffer • Rotational speed of 4,200rpm •...
  • Page 4: Setup

    Master/Slave Settings Your Toshiba Hard Disk Drive can be configured as either a "Master" or "Slave" unit. Master configuration is used for all single drive applications, and master or slave configuration (only one of each per port) is used for two drive applications.
  • Page 5: Installation Notes

    Installation Notes The drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. In order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB. Space should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.
  • Page 6: Using The Hdd

    USING THE HARD DISK DRIVE – MK6025GAS (HDD2189) Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk drive.
  • Page 7: Troubleshooting

    Manager DiskGo by Ontrack. Check with your local computer/software supplier for availability or contact the software manufacturer. How do I install my 2.5" Toshiba Hard Drive into my You will need a HDD mounting kit in order to install a desktop or tower system? Toshiba 2.5"...
  • Page 8: Specifications

    SPECIFICATIONS –MK6025GAS (HDD2189) General Model MK6025GAS (HDD2189) Interface ATA-2/3/4/5/6 Functionality Formatted Capacity 60.011GB Rotational Speed 4200rpm Avg. Rotational Latency 7.14/ms Spin-up Time 4sec (typical) Buffer Seek Time (Average) Internal Transfer Rate 201.6 ~ 307.5 Mbits/sec (max) Host Transfer Rate 100Mbytes/sec...
  • Page 9 Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) 1950 Canadian Standard Association (CSA) C22.2 No.220 No. 950 TUV Rheinland EN 60 950 EMC - EN50081-1 EN55022: 1988 Class B EN60555-2: 1987+ A1 EN60555-3: 77A (Co) 38 EMC - EN50082-1 IEC 801-2: 1991 EIC 801-3: 1994 IEC 801-4: 1988...
  • Page 10: Drive Connectors

    DRIVE CONNECTORS –MK6025GAS (HDD2189) Figure 1.MK6025GAS HDD Rear View - Connectors Interface Connector Drive Side Connector Yamaichi GAP050K11617 or equivalent Recommended Host Side Connector Board Straight type: Berg 86455-044 86456-044 or equivalent Cable Berg 89361-044 or equivalent Recommended Cable Characteristics Standard diameter 0.32mm (28AWG)
  • Page 11 Interface Pin Assignment DRIVE INTERFACE SIGNALS SIGNAL SIGNAL RESET GROUND DD 7 DD 8 DD 6 DD 9 DD 5 DD 10 DD 4 DD 11 DD 3 DD 12 DD 2 DD 13 DD 1 DD 14 DD 0 DD 15 GROUND DMARQ...

This manual is also suitable for:

Hdd2189

Table of Contents