Install Menu Functions - Bosch AutoDome VG4-100 Series User Manual

12 en | Advanced Setup
5.3

Install Menu Functions

This section provides a graphical representation of the Install menu and descriptions for all
functions.
Install Menu
INSTALL Menu
CAMERA ID
SET FOCUS NOW
COMM
SYNC
DEFAULTS
EXIT
INSTALL Menu
Function
CAMERA ID
SET FOCUS NOW
COMM
SYNC
DEFAULTS
EXIT
NOTICE! When using Bilinx control, the COMM ON/OFF menu selection is not active. This
i
function can be accessed only through the camera menu keys when the CTFID software is not
actively running.
F01U028033 | 1.0 | 2006.08
INSTALL CAMERA ID
CAMERA ID
ID POSITION
EXIT
INSTALL SYNC
SYNC
VPHASE
EXIT
INSTALL DEFAULTS
RESTORE ALL?
EXIT
Selection(s)
Selects submenu
ON, OFF
Selects submenu
Selects submenu
VG4-100 Series User's Manual
AutoDome Modular Camera System
Description
Accesses the Camera ID submenu.
Completely opens the lens iris for best focus.
The recommended focus procedure is:
1. Unlock the focus locking screw.
2. From the INSTALL menu highlight SET
FOCUS NOW.
3. Turn the lens focus adjustment as required.
4. Tighten the lens focus locking screw.
5. Exit the menu selection.
Turns on Bilinx communication. See notice
below.
Accesses the synchronization functions.
Returns all settings for all modes to their
default.
Exits this menu.
Bosch Security Systems, Inc.