Panasonic TH-42PF30U Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-42PF30U
  6. Operating instructions manual

Panasonic TH-42PF30U Operating Instructions Manual

High definition plasma display
Hide thumbs Also See for TH-42PF30U:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Operating Instructions
High De¿ nition Plasma Display
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
Model No.
TH-42PF30U
TH-50PF30U

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-42PF30U

Summary of Contents for Panasonic TH-42PF30U

  • Page 1 Model No. TH-42PF30U TH-50PF30U Operating Instructions High De¿ nition Plasma Display Before connecting, operating or adjusting this product, English please read these instructions completely. Please keep this manual for future reference.
  • Page 2 If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug. ® As an ENERGY STAR Partner, Panasonic has determined that this product meets the ® ENERGY STAR guidelines for energy ef¿ ciency.

  • Page 3: Important Safety Instructions

    Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli¿...

  • Page 4: Table Of Contents

    Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.

  • Page 5: Fcc Statement

    To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modi¿ cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device. FCC Declaration of Conformity Model No.

  • Page 6: Safety Precautions

    • AV Terminal Box ......... TY-TB10AV • 3D IR TRANSMITTER ....... TY-3D30TRW • Anti Glare Filter .......... TY-AR42P12W (for TH-42PF30U), TY-AR50P12W (for TH-50PF30U) • Touch Panel ..........TY-TP42P10S (for TH-42PF30U), TY-TP50P10S (for TH-50PF30U) Always be sure to ask a quali¿ ed technician to carry out set-up.

  • Page 7: Maintenance

    Safety Precautions WARNING Ensure that the mains plug is easily accessible. Setup Do not use any power supply cord other than that Do not place the Plasma Display on sloped or unstable provided with this unit. surfaces, and ensure that the Plasma Display does not hang over the edge of the base.

  • Page 8: 3D Safety Precautions

    Safety Precautions 3D Safety Precautions WARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear. Lithium Battery Batteries must not be exposed to excessive heat such as sunshine, ¿...
  • Page 9 View from at least the recommended distance (3 times the effective height of the screen). Recommended distance TH-42PF30U: 63.0”/1.6 m TH-50PF30U: 74.9”/1.9 m When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance 3 times further than the height of the actual image.

  • Page 10: Accessories

    Accessories Accessories Supplied Check that you have the Accessories and items shown Operating CD-ROM Remote Control Transmitter Batteries for the Instruction book (Operating N2QAYB000535 Remote Control instructions) Transmitter (AA Size × 2) Ferrite core × 2 Clamper × 1 AC cord TMME289 J0KG00000014 Use the Ferrite cores to comply with...

  • Page 11: Connections

    Connections Speaker connection When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) Black While pressing the lever, insert the core wire. Speaker terminal (L) Speaker Black...

  • Page 12: Video Equipment Connection

    Connections Video equipment connection 3D IR TRANSMITTER: SERIAL: Connect the 3D IR Control the Plasma Display TRANSMITTER (optional by connecting to PC. accessory). (see page 15) Terminal board (optional SLOT: accessories) insert slot (see page 6) Note: The right side slot is for terminal board with 2-slot width.

  • Page 13: Hdmi Connection

    Connections HDMI connection [Pin assignments and signal names] Pin No. Signal Name Pin No. Signal Name T.M.D.S Clock T.M.D.S Data2+ Shield T.M.D.S Data2 T.M.D.S Clock- Shield T.M.D.S Data2- T.M.D.S Data1+ Reserved T.M.D.S Data1 HDMI cable (N.C. on device) Shield T.M.D.S Data1- T.M.D.S Data0+ T.M.D.S Data0 DDC/CEC...

  • Page 14: Pc Input Terminals Connection

    Connections PC Input Terminals connection (Female) Shared with DVI-D IN. COMPUTER Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Conversion adapter (if necessary) Mini D-sub 15p PC cable (Male) Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 68), adjustment values such as for the standard picture positions and sizes have already been stored in this unit.

  • Page 15: Serial Terminals Connection

    Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to “RS-232C”. (see page 53) (Male) COMPUTER RS-232C Straight cable...

  • Page 16: Power On / Off

    Power ON / OFF Connecting the AC cord plug to the Plasma Display. Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿ rst. INPUT MENU ENTER/...
  • Page 17 Power ON / OFF When ¿ rst switching on the unit Following screen will be displayed when the unit is turned on for the ¿ rst time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE PRESENT TIME SETUP DISPLAY ORIENTATION OSD LANGUAGE...

  • Page 18: Selecting The Input Signal

    Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: VIDEO COMPONENT* HDMI VIDEO: Video input terminal in AV IN (VIDEO). COMPONENT*: Component or RGB input terminal in COMPONENT/RGB IN.

  • Page 19: Basic Controls

    Basic Controls Main Unit Remote control sensor Volume Adjustment Volume Up “+” Down “–” W h e n t h e m e n u s c r e e n i s displayed: “+” : press to move the cursor up “–”...

  • Page 20: Remote Control Transmitter

    Basic Controls Remote Control Transmitter OFF TIMER button The Plasma Display can be preset to switch to stand- ACTION button by after a ¿ xed period. The setting changes to 30 Press to make selections. minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

  • Page 21: Aspect Controls

    ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law.

  • Page 22: Digital Zoom

    Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. EXIT Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] OFF TIMER button [Unit]...

  • Page 23: Viewing 3D Images

    Viewing 3D images You can enjoy viewing 3D images with contents or programmes compatible with 3D effect by using the 3D eyewear (optional). Note: You need the 3D IR TRANSMITTER (optional) and the 3D eyewear (optional) to view the 3D images on this display. For further information, see the instruction manuals of the 3D IR TRANSMITTER and the 3D eyewear.

  • Page 24: Troubleshooting For 3D Eyewear

    Viewing 3D images Troubleshooting for 3D Eyewear Symptoms Checks Cannot see 3D images • Has the 3D Eyewear been switched On? • Ensure that “3D EYEWEAR” in “3D SETTINGS” is set to “ON”. (see page 36) • Some 3D image signals may not be automatically recognized as 3D images.

  • Page 25: On-Screen Menu Displays

    On-Screen Menu Displays Remote Control Unit Press several times. Display the menu screen. MENU Each time the MENU button is pressed, the Press to select. menu screen will switch. (Example: PICTURE menu) Normal Viewing PICTURE SET UP SOUND POS./SIZE Select the item. Select.

  • Page 26: Adjusting Pos./Size

    Adjusting POS./SIZE Press to display the POS./SIZE menu. Press to select the menu to adjust. POS./SIZE NORMALIZE NORMAL AUTO SETUP H-POS H-SIZE V-POS Press to adjust the menu. V-SIZE DOT CLOCK CLOCK PHASE CLAMP POSITION 1:1 PIXEL MODE Note: Unadjustable items are grayed out.
  • Page 27 Adjusting POS./SIZE Notes: • If the dot clock frequency of an analog signal is 162 MHz or higher, “DOT CLOCK” and “CLOCK PHASE” cannot be automatically corrected. • When digital signal input, DOT CLOCK and CLOCK PHASE cannot be made. •...
  • Page 28 Adjusting POS./SIZE CLAMP POSITION (During Component/PC input signal) Adjusts the clamp position when black parts of the image have no detail due to underexposure or are tinged with green. Optimum value for Clamp Position adjustment When black parts have no detail due to underexposure (blackout) Value that causes least blackout is the optimum.

  • Page 29: Picture Adjustments

    PICTURE Adjustments Press to display the PICTURE menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

  • Page 30: Advanced Settings

    PICTURE Adjustments Notes: Item Effect Adjustments • You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, Adjusts the proper picture contrast. PICTURE Less More SHARPNESS) for each PICTURE MENU. Adjusts for easier viewing of dark pictures • The setting details for STANDARD, DYNAMIC, BRIGHTNESS such as night scenes and black hair.

  • Page 31: Picture Pro¿ Les

    Picture Pro¿ les Up to 8 combinations of picture adjustment values (in the PICTURE menu and ADVANCED SETTINGS) can be stored in the display memory as pro¿ les and applied as needed, for a convenient way to enjoy your preferred picture settings. PICTURE NORMALIZE NORMAL...

  • Page 32: Saving Pro¿ Les

    Picture Pro¿ les Saving pro¿ les Follow these steps to save picture adjustment values as pro¿ les. Note: When the settings are locked in “EXTENDED LIFE SETTINGS”, pro¿ les cannot be saved. Enter a name for the pro¿ le. Specify the picture quality in the PICTURE menu and [Entering pro¿...

  • Page 33: Loading Pro¿ Les

    Picture Pro¿ les Loading pro¿ les Load pro¿ les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro¿ les are stored in memory according to the selected input interface. (see page 18) • When the settings are locked in “EXTENDED LIFE SETTINGS”, pro¿ les cannot be loaded. Select the pro¿...

  • Page 34: Sound Adjustment

    SOUND Adjustment SOUND Press to display the SOUND menu. NORMALIZE NORMAL STANDARD AUDIO MENU Select to adjust each item. BASS Press to select the menu to adjust. TREBLE Select the desired level by listening to the sound. BALANCE SURROUND Press to exit from adjust mode. Item Details STANDARD: Emits the original sound.

  • Page 35: Present Time Setup / Set Up Timer

    PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, con¿ rm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. SET UP Press to display the SET UP menu.

  • Page 36: 3D Settings

    3D SETTINGS To view the 3D images, please adjust and setup the 3D settings. Note: Set these settings for each input terminals. 3D SETTINGS sub-menu screen SET UP 3D SETTINGS 3D SETTINGS SIGNAL SCREENSAVER 3D EYEWEAR EXTENDED LIFE SETTINGS 3D INPUT FORMAT AUTO INPUT LABEL LEFT/RIGHT SWAP...

  • Page 37: Screensaver (For Preventing Image Retention)

    SCREENSAVER (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. SET UP 3D SETTINGS Press to display the SET UP menu. SIGNAL SCREENSAVER Press to select the SCREENSAVER.

  • Page 38: Setup Of Screensaver Time

    SCREENSAVER (For preventing image retention) Setup of SCREENSAVER Time After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.) Press to select START TIME / FINISH TIME (when TIME OF SCREENSAVER DAY is selected).

  • Page 39: Reduces Screen Image Retention

    Reduces screen image retention EXTENDED LIFE SETTINGS The following settings are setup to reduce image retention: EXTENDED LIFE SETTINGS SET UP Set to the recommended value EXPRESS SETTINGS 3D SETTINGS CUSTOM SETTINGS Set individually SIGNAL RESET Reset to the factory settings SCREENSAVER EXTENDED LIFE SETTINGS INPUT LABEL...
  • Page 40 Reduces screen image retention NANODRIFT SAVER Moves the display position of the screen slightly to reduce image retention on the display panel. LOW–HIGH: NANODRIFT SAVER operates. The display position of the screen moves at set time intervals. You can set the screen movement range.

  • Page 41: Custom Settings

    Reduces screen image retention CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. When a menu is locked, it is grayed out and cannot be set. Select “CUSTOM SETTINGS”. “PICTURE MENU” and “PICTURE” will no longer select EXTENDED LIFE SETTINGS be able to set in the “PICTURE”...

  • Page 42: Reduces Power Consumption

    Reduces power consumption • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 16, 19, 20), so standby power of the set is reduced.

  • Page 43: Customizing The Input Labels

    Customizing the Input labels This function can change the label of the Input signal to be displayed. (see page 18) SET UP Press to display the SETUP menu. 3D SETTINGS SIGNAL SCREEN SAVER Press to select INPUT LABEL. EXTENDED LIFE SETTINGS INPUT LABEL COMPONENT/RGB-IN SELECT Press to display the INPUT LABEL screen.

  • Page 44: Selecting The On-Screen Menu Language

    Selecting the On-Screen Menu Language Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages SET UP 3D SETTINGS English(UK) SIGNAL Deutsch SCREENSAVER Français EXTENDED LIFE SETTINGS Italiano INPUT LABEL Español COMPONENT/RGB-IN SELECT ENGLISH(US)

  • Page 45: Set Up For Multi Display

    SET UP for MULTI DISPLAY By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. Note: During Multi display, the 3D images are displayed as 2D images.

  • Page 46: Id Remote Control Function

    SET UP for MULTI DISPLAY Item Details Select “OFF” or “ON”. Equalize the brightness of all the The brightness depends on each displays. display’s setting. AI-SYNCRONIZATION Notes: • If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and these settings will be ¿...

  • Page 47: Set Up For Portrait

    SET UP for PORTRAIT Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. (Example) Notes: • When using the PORTRAIT function with displays set vertically, “DISPLAY ORIENTATION” in SET UP menu has to be set to “PORTRAIT”...
  • Page 48 SET UP for PORTRAIT VIEWING AREA / LOCATION VIEWING AREA: Set a mode of image division for PORTRAIT function. LOCATION: Set a location of image to be displayed for PORTRAIT function. Press to select VIEWING AREA or LOCATION. PORTRAIT SETUP Press to select each function.

  • Page 49: Set Up For Input Signals

    SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the Component / RGB or PC input terminals. Y, P signals “COMPONENT” RGB signals “RGB” SET UP Press to display the SET UP menu. 3D SETTINGS SIGNAL SCREENSAVER...

  • Page 50: Signal Menu

    SET UP for Input Signals SIGNAL menu SET UP Note: “SIGNAL” setup menu displays a different setting condition for each input signal. 3D SETTINGS SIGNAL Press to display the SET UP menu. SCREENSAVER EXTENDED LIFE SETTINGS INPUT LABEL Press to select the “SIGNAL”. COMPONENT/RGB-IN SELECT POWER SAVE STANDBY SAVE...
  • Page 51 SET UP for Input Signals • SYNC This function operates only during input from PC IN terminal. Setting RGB sync signal Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal). AUTO: The H and V sync or synchronized signal is automatically selected.

  • Page 52: Noise Reduction

    SET UP for Input Signals • NOISE REDUCTION Sets the following three NR (Noise Reduction) functions together. VIDEO NR, MOSQUITO NR, BLOCK NR Press to select “NOISE REDUCTION”. NOISE REDUCTION Press to select “OFF”, “MIN”, “MID”, “MAX”, “ADVANCED”. Advanced NR Sets the three NR functions separately.

  • Page 53: Network Setup

    Network Setup Make the various settings to use the network function. SETUP DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings MULTI DISPLAY SETUP Set DHCP. PORTRAIT SETUP When “OFF” is selected, IP ADDRESS and other settings can be set SET UP TIMER manually.

  • Page 54: Options Adjustments

    Options Adjustments Options Press to display the SET UP menu. Weekly Command Timer Audio input select Touch Panel settings Press to select “OSD LANGUAGE”. Onscreen display Initial input Initial VOL level Maximum VOL level Input lock Press for more than 3 seconds. Button lock Remocon User level Press to select “Options”.
  • Page 55 Options Adjustments Item Adjustments Locks the input switch operation. SLOT INPUT* VIDEO COMPONENT* HDMI *1 “SLOT INPUT” is displayed when an optional Terminal Board is installed. When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed. *2 “COMPONENT”...
  • Page 56 Options Adjustments Item Adjustments Off: Nullify all the settings adjusted. Studio W/B Sets the color temperature for TV studio. Note: Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu. Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”.

  • Page 57: Safety Precautions (To Hide 3D Safety Precautions)

    Options Adjustments Item Adjustments 3D Safety Precautions show/hide is set during power ON. On: 3D Safety Precaution is shown every time when the power is ON. Off: 3D Safety Precaution is not shown when the power is ON. When the setting changes from “On” to “Off”, the con¿ rmation screen is displayed as below. Pressing “YES”...
  • Page 58 Options Adjustments Press to select a command number. Press to show the previous / next command pages (1-8) of the selected program. Press to show the command setting screen. Weekly Command Timer Weekly Command Timer Program Program AVL:00 8:00 20:00 DAM:NORM 10:30 IMS:SL1...

  • Page 59: Audio Input Select

    Options Adjustments Audio input select Set up the sound when an image input is selected. Options Weekly Command Timer Audio input select Touch Panel settings Onscreen display Press ACTION ( ) button Audio input select Press to select image input. SLOT INPUT SLOT INPUT Press to select audio input.

  • Page 60: Touch Panel Settings (Settings When Using Touch Panel)

    Options Adjustments Touch Panel settings (Settings when using Touch Panel) The mode to restrict NANODRIFT SAVER (see page 40) operation when using Touch Panel (available as an option) is set up. Options Weekly Command Timer Audio input select Touch Panel settings Press ACTION ( ) button Set “Touch Panel mode”...

  • Page 61: Using Network Function

    Network function of the unit can control the unit in the same way as serial control from a network. Supported commands Commands used in the serial control are supported. (see page 15) Note: Consult your local Panasonic dealer for detail instructions on command usage.

  • Page 62: Pjlink™ Protocol

    Returns “TH-50PF30” (for 50-inch model) INFO? Other information query Returns version number CLSS? Class information query Returns “1” PJLink™ security authentication Set “Panasonic” for the PJLink™ password. • PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.

  • Page 63: Using Web Browser Control

    The password can be changed on the Password Setup screen after logging in (see page 65). The user name cannot be changed. Under no circumstances, Panasonic Corporation or it's associated companies will ask customers their password directly. Even if you are asked directly, please do not reveal your password.

  • Page 64: Display Control (Basic Control/Option Control Screen)

    Using Web Browser Control TOP screen structure of the Web browser control After logging in, the TOP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC...

  • Page 65: Network Setting (Network Setup Screen)

    Enter the old password. PASSWORD Enter the new password. PASSWORD Notes: Enter the password entered in “NEW • The default password is “Panasonic”. PASSWORD PASSWORD” for con¿ rmation. • Up to 32 alphanumeric characters can be used for a (RETYPE) password.

  • Page 66: Troubleshooting

    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Electrical Appliances Interference Noisy Sound Cars / Motorcycles Fluorescent light Volume Normal Picture No Sound (Check whether the mute function has been activated on the remote control.) Not plugged into AC outlet Not switched on No Picture...

  • Page 67: List Of Aspect Modes

    List of Aspect Modes Aspect mode Description All Aspect: Factory setting Picture Enlarged screen All Aspect: Off The display of the pictures ¿ lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspect ratio.

  • Page 68: Applicable Input Signals

    Applicable Input Signals Mark: Applicable input signal DVI-D IN COMPONENT / RGB IN Horizontal frequency Vertical frequency Signal name / PC IN (Dot clock HDMI (kHz) (Hz) (Dot clock (MHz)) (MHz)) 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) 525 (480) / 60p 31.47 59.94...

  • Page 69: Shipping Condition

    Applicable Input Signals Video input (VIDEO) Horizontal Vertical Signal name frequency(kHz) frequency(Hz) NTSC 15.73 59.94 15.63 50.00 PAL60 15.73 59.94 SECAM 15.63 50.00 Modi¿ ed NTSC 15.73 59.94 Shipping condition This function allows you to reset the unit to the factory setting. SET UP Press to display the SET UP menu.

  • Page 70: Command List Of Weekly Command Timer

    Command list of Weekly Command Timer Command Control details AAC:MENCLR Audio Menu (CLEAR) AAC:MENDYN Audio Menu (DYNAMIC) AAC:MENSTD Audio Menu (STANDARD) AAC:SURMON Surround (ON) AAC:SUROFF Surround (OFF) AMT:0 Audio Mute (OFF) AMT:1 Audio Mute (ON) í í í í AVL:00 Audio Volume (00) AVL:10 Audio Volume (10)

  • Page 71: Speci¿ Cations

    Speci¿ cations TH-42PF30U TH-50PF30U 110 - 127 V AC, 50/60 Hz Power Source Power Consumption 390 W 475 W Rated Power Consumption Save OFF 0.7 W, Save ON 0.4 W Save OFF 0.7 W, Save ON 0.4 W Stand-by condition 0.2 W...
  • Page 72 Warranty Service purposes. Model Number Serial Number ¤ Panasonic Corporation 2011 Panasonic Solutions Company Unit of Panasonic Corporation of North America Executive Of¿ ce : Three Panasonic Way 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario...

This manual is also suitable for:

Th-50pf30uTh-60pf30uTh-65pf30u

Table of Contents