Download Print this page

To Set Bake - Kenmore Sears 93131 Use And Care And Safety Manual

Advertisement

TO START
THINGS
COOKING
COOKTOP
COOKING
The sign near each cooktop control knob shows which
element Is turned on by that knob.
O0
O0
Oe
O0
• 0
O0
O0
O•
Left
Left
Right
Right
Front
Rear
Rear
Front
To operate
¢ooktop
controls:
1. Push to turn.
2. Set on or between marks for desired heat.
An Indicator fight will glow when any cool(top element
is on.
OFF
For best cooking results and energy efficient operation,
you should usa pans that:
A. Have flat bottoms and straight skies.
B. Have light handles that do not tilt pan s.
C. Are about the same size as the element.
/
/
MED
\
OVEN
CONTROL
COOKTOP CONTROL
Your oven control has a selector knob for chcoslng
BAKE, BROIL, or CLEAN. There are also three Indicator
lights:
• PREHEATED Indicator light--
tums on and stays
on when oven has reached selected tempera-
tures.
I
A
Never
line
the
bowls
below
conktop
elements
with aluminum
foil•
Foil can
block normal heat flow end damage the
range.
This
is especially
true
if foil
blocks
the oven
vent
tube
under
the
right rear cooktop
element.
1. The latch handle Is locked during a baking func-
tion;
OVEN ON Indicator
light--
turns on and stays on
when bake, broil, or clean function
has been cho-
sen.
LATCH DOOR Indicator Ilght -- turns on for self-
clean. If the LATCH DOOR Indicator light flashes
you should check for one of the following:
2. The latch handle Is not locked during a salf-clean
function.
BAKING
TO SET BAKE
1.
Be sure to remove any packaging material before
baking In your new oven. See page 10.
2.
Turn the OVEN CONTROL knob to selected tem-
parature from warm to 550°F.
3.
The "OVEN ON" Indicator light will glow.
4.
When the oven has reached the selected tempera-
ture the "PREHEATED"
and "OVEN ON" Indicator
light will glow. Place food In the oven,
5.
The "PREHEATED" and =OVEN ON" Indicator IIghts
will remain on until baking Is complete
and the
control
knob Is turned to the off position.
During the baking function you may hear clicking. This
is normal. The oven heating elements cycle on and off
to maintain the selected temperature.
6
NEMTC54

Advertisement

loading

This manual is also suitable for:

93131