Problem Solving Guide - Miele KM 6322 Operating And Installation Instruction

Ceramic hobs with induction
Table of Contents

Advertisement

Problem solving guide

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
Installation work and repairs to electrical appliances must only be carried out
by a suitably qualified and competent person in strict accordance with current
local and national safety regulations. Do not attempt to open the casing of the
appliance. Repairs and other work by unqualified persons could be dangerous
and Miele cannot be held liable for unauthorised work.
Problem
The hob or cooking
zones cannot be
switched on.
50
Possible cause
The mains fuse has tripped. Reset the trip switch in the
There may be a technical
fault.
Remedy
mains fuse box (minimum
fuse rating - see data
plate).
Disconnect the appliance
from the electricity supply
for approx. 1 minute. To do
this:
– switch off at the isolator,
or
– disconnect the mains
fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it
still will not switch on,
contact a qualified
electrician or the Miele Ser-
vice Department.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 6323

Table of Contents