Materials
Needed
To simplify the instailation Sears has available the installation parts shown below. You may or may not need all of these materials,
depending on your type of installation.
_
FLEXlBLE
WATER HEATER GAS
CONNECTOR
W_TH RTTtNGS
DRAIN PANS AVAILABLE
IN 20" (508 turn}
DIAMETER FOR WATER HEATERS HAVING
A DlAMETER
18" (457 ram) OR LESS, 24"
(610ram) DIAMETER FOR WATER HEATERS
HAVING A DIAMETER
22" (559 ram) OR
LESS AND AVAILABLE
iN 28" (711 ram)
DIAMETER FOR WATER HEATERS HAVING
A D_AMETER 26" (550 ram) OR LESS
EXPANSION TANKS FOR THERMAL
EXPANSION
CONDiTiONS
AVAILABLE
IN
2 GALLONS
(7.6 LITERS)
AND
5 GALLONS
(18.9
LITERS)
CAPACITY THROUGH
LOCAL SEARS STORE OR
SERVICE
CENTER
Basic
Too_s
You may or may not need alI these tools, depending
on your
type of installation. These tools can be purchased at your local
Sears Store.
* Pipe Wrenches
(2) 14" (356 ram)
Screwdriver
* Tin Snips
* 6' (1.82 m) Tape or Folding
Ruler
,_ Garden
Hose
* Drill
,* Pipe Dope or Teflon
Tape
DR_LL
SLOToHEAD
SCREWDRIVER
PHILUPS
SCREWDRIVER
T_N SN_PS
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER HEATER
CONNECTIONS)
P_PE DOPE
(SQUEEZE
TUBE)
USE FOR WATER AND GAS
CONNECTIONS
GARDEN HOSE
6 FOOT TAPE
PIPE WRENCH
Additiona_
Tooms Needed
When Sweat
So_dering
* Tubing
Cutters
or Hacksaw
* Propane
Tank
* Soft Solder
* Solder
Flu×
* Emery
Cloth
* Wire
Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERYCLOTH
3/4" (19 ram) WiRE BRUSH
1/2" (13 ram) W_RE BRUSH
ROLL OF LEAD-FREE
SOFT SOLDER
SOLDER
FLUX