Sony DWZ-B30GB Operating Instructions Manual page 19

B Remaining transmitter battery
indicator
Displays the remaining battery charge of
the transmitter.
An approximate duration is displayed for
the remaining usage time. This duration
appears only when signals are being
received.
C Audio level meter
Displays the audio level.
Set the audio level so that the yellow or red
bar does not appear.
D Equalizer status
Displays the on/off status of the equalizer.
E Receiving level indicator
Displays the reception status of the radio
signal.
More bars indicate more stable reception.
d ESC (escape) button
Cancels operations, or returns to the main
screen from the settings screen.
e Rotary encoder
Allows you to change settings.
For details on changing settings, see "Receiver
Settings" (page 28).
Rear
a ANTENNA a/b connector (BNC
type)
Connect the supplied antenna here.
b UNBALANCED OUTPUT TUNER/
AUX (external audio output)
connector (headphone jack)
Connect monitoring equipment and similar
peripheral devices here.
The audio output from the UNBALANCED
OUTPUT TUNER/AUX connector will
continue, even if the muting function of the
transmitter is enabled. You can enable or
disable the audio from this connector via
the settings in the receiver's display.
For details on settings, see "Configuring the
transmitter muting function for the UNBALANCED
OUTPUT TUNER/AUX connector" (page 30).
For details on connections, see "System
Configuration Examples" (page 34).
c UNBALANCED OUTPUT MAIN
(main audio output) connector
(headphone jack)
Connect a mixer or an amp here.
For details on connections, see "System
Configuration Examples" (page 34).
d BALANCED OUTPUT connector
(XLR type)
Connect a mixer or similar device here.
For details on connections, see "System
Configuration Examples" (page 34).
e MIC/LINE (audio output level)
selector
Selects the audio output level of the
BALANCED OUTPUT connector.
MIC: Sets the audio output level to the mic
level.
LINE: Sets the audio output level to the
line level.
Caution
Do not set the selector to the LINE position
while outputting audio to an audio mixer or
similar device. Inputting audio at excessive
levels may distort audio or damage the
playback/recording device.
Parts Identification 19