Backup And Update The Devices' Configuration - D-Link DV-600P - D-View Professional Edition User Manual

Backup and Update the Devices' Configuration

Use the Batch tool to backup and update the devices' configuration.
1. Go to Application > Batch Config > Run Batch or right-click and select
Run Batch from the popup menu after selecting the devices in the opened
topology. The Run Batch screen displays.
2. A brief description of other tabs is given below:
•
•
•
•
•
•
•
•
3. Select the Config File Manager tab. The Config File Manager tool helps
the administrators to perform the following actions.
•
Figure 64:
Save: Save device configuration.
RMON: Enable/Disable RMON status to monitor device
performance.
Safeguard Engine: Enable/Disable safeguard status. Refer to
Using Safeguard Check
Spanning Tree: Enable/Disable the status to prevent undesirable
loops in the network.
Firmware Update: Upload/download firmware through TFTP
server.
Resource: Select to update the resource information for a specific
device.
Config File Manager: Update and backup configuration files from
the TFTP server.
Port Status: Select to view the port status of the device.
TFTP Server IP: Enter the IP address on which the TFTP server
program runs.
Run Batch screen
for more information.