Recommendation; Dimensions And Mass - Toshiba R6472 - DVD±RW Drive - IDE Specifications

3.3.3. Recommendation:

When this drive is to be installed in another equipment from the side, using mounting surfaces, it may
be deformed or operational failure may occur for the following reasons.
(1) The spaces between this drive and the mounting surfaces on both sides are too wide.
(2) The mounting surfaces are deformed.
Given this, it is necessary to change the installing structure, as shown in Figure 3. It is also
recommended to change the structure, as shown in Figure 4, to prevent the drive from deforming, or
narrow the space to 0.3 mm or less by attaching a fitting, such as a spacer.
Elastic Structure
3.4. Dimension and Mass --------See Figure 5 for details --------
(1) External Dimensions (W x H x D)
(2) Mass
(102.6+0.2/-0.2 mm)
102.8+0.2/-0 mm
Figure 3
If the spaces between the drive and the
mounting surfaces are too wide, use a
spacer, etc. to narrow the space to 0.3
mm or less.
Figure 4
128mm x 12.7 mm x 126.1 mm (excluding bezel)
0.190 kg (Typ.)
11.4 kg (Bulk Packaged, 50 units)
4.0 kg (Bulk Packaged, 20 units)
9 / 28
Max. 3.0 mm
Spacers, etc.
TS-L532A (SD-R6472) Rev.1.1
Max. 0.3 mm