Machine Information; Default Settings - Brother HL-1110 User Manual

Troubleshooting and other information

Machine Information

Default settings

The machine has two levels of default settings; the default settings have been set at the factory before
shipment.
 Factory Reset
 Settings Reset
NOTE
• You cannot modify the preset default settings.
• Page counters can never be changed.
Factory Reset
You can partially reset the machine back to its default printer settings:
a
Turn off the machine.
b
Make sure that the top cover is closed and the power cord is plugged in.
c
While holding down
d
Release . Make sure that all the LEDs turn off.
e
Press eight times. Make sure that all the LEDs light up to indicate the machine has been reset to its
factory default settings. The machine will restart.
Settings Reset
This operation will reset all the machine settings back to the settings that were set at the factory:
a
Turn off the machine.
b
Make sure that the top cover is closed and the power cord is plugged in.
c
While holding down
d
Release . Make sure that all the LEDs turn off.
e
Press ten times. The machine will automatically restart.
, open and close the top cover once.
, open and close the top cover once.
A
A
A
A
A
60